therefore preventing a double NAT situation. Never lived in a Cox area
> Cox modems will learn and allow only 1 mac at a time (unless business
> is set to allow more, but not on residential). If switching out
> firewalls, I 99% of time reboot the modem first and foremost.
>
> -mb
>
> On Sun, May 3, 2020 at 12:08 PM Snyder, Alexander J via PLUG-discuss
> <plug-discuss@lists.phxlinux.org
> <mailto:plug-discuss@lists.phxlinux.org>> wrote:
>
> I got it working.
>
> I assigned the SFP+ port as my LAN and assigned it the 10.x.x.x/16
> network. Then I had to call COX and list the WAN Mac address with
> them. Upon doing so I was able to reach external sites, and all
> downstream devices started coming alive!
>
> Thanks for all the suggestions and help!
>
> Thanks,
> Alexander
>
> Sent from my Galaxy S10+
>
> On Sun, May 3, 2020, 03:14 Herminio Hernandez, Jr. via
> PLUG-discuss <plug-discuss@lists.phxlinux.org
> <mailto:plug-discuss@lists.phxlinux.org>> wrote:
>
> Can you login to the FW via the LAN interface? Can you ping
> the FW LAN interface? Check the routing and NAT policy on the
> FW. All outbound traffic should NAT to the FW WAN interface
> and there should be a default (0.0.0.0/0 <http://0.0.0.0/0>)
> route to the internet.
>
> On Sat, May 2, 2020 at 7:27 PM Seabass via PLUG-discuss
> <plug-discuss@lists.phxlinux.org
> <mailto:plug-discuss@lists.phxlinux.org>> wrote:
>
> I'm with Mac, I think it is not the firewall, but if you
> have the ability to plug it into a display with a
> keyboard, you can use that for configuration and modify a
> different device at the same time.
>
> Makes it easier to troubleshoot by giving you the ability
> to configure your pfSense ports at the same time.
>>
>>
>> Message: 2
>> Date: Sat, 2 May 2020 09:04:35 -0700
>> From: Donald Mac McCarthy <mac@oscontext.com
>> <mailto:mac@oscontext.com>>
>> To: "Snyder, Alexander J via PLUG-discuss"
>> <plug-discuss@lists.phxlinux.org
>> <mailto:plug-discuss@lists.phxlinux.org>>
>> Subject: Re: pfSense + Ubiquity
>> Message-ID:
>> <18adfa38-3e72-7b0a-e31a-1ddf175d717f@oscontext.com
>> <mailto:18adfa38-3e72-7b0a-e31a-1ddf175d717f@oscontext.com>>
>> Content-Type: text/plain; charset="utf-8"
>>
>> I can help - but I am unavailable to do so until tomorrow.
>>
>> Make sure there are not any thing other than default
>> VLANs on the
>> interfaces to start with. Ubiquiti is famous for not
>> havinght eSFP+
>> ports active in the default configuration, and I believe
>> the switch has
>> all the ports to shutdown on default config as well.
>>
>> I think it is the switch not passing traffic through - no
>> the firewall.
>>
>> Mac
>> Snyder, Alexander J via PLUG-discuss wrote on 5/2/20 8:53 AM:
>> > Does anyone out there have experience with pfSence and
>> Ubiquity switches?
>> >
>> > I have zero with either but that didn't stop me from
>> buying both ....
>> > how hard could it be?! LOL.
>> >
>> > I bought a Negate XG-1537-1U. I bought a Unifi Pro 24
>> PoE switch.
>> >
>> > I can configure the FW immediately after
>> > firstboot/restore-default-configs, but only if i set
>> the LAN interface
>> > to be the cable that goes directly to my laptop. That's
>> great, but
>> > that does shit for the downstream switch.
>> >
>> > I have a 10GB SFP+ Port that I want to configure as the
>> downstream
>> > port to ubiquity, but any configuration other than
>> mentioned above
>> > fails .... and I'm now on my 12th "Reset To Factory
>> Defaults" ... any
>> > help on this would be greatly appreciated!
>> >
>> > Thanks,
>> > Alexander
>> >
>> > Sent from my Galaxy S10+
>> >
>> >
>> > ---------------------------------------------------
>> > PLUG-discuss mailing list -
>> PLUG-discuss@lists.phxlinux.org
>> <mailto:PLUG-discuss@lists.phxlinux.org>
>> > To subscribe, unsubscribe, or to change your mail settings:
>> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>> --
>> Donald "Mac" McCarthy
>> Director, Field Operations
>> Open Source Context
>> +1.602.584.4445
>> mac@oscontext.com <mailto:mac@oscontext.com>
>> https://oscontext.com
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL:
>> <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20200502/aeab14b4/attachment-0001.html>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> PLUG-discuss mailing list -
>> PLUG-discuss@lists.phxlinux.org
>> <mailto:PLUG-discuss@lists.phxlinux.org>
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>>
>> ------------------------------
>>
>> End of PLUG-discuss Digest, Vol 179, Issue 2
>> ********************************************
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list -
> PLUG-discuss@lists.phxlinux.org
> <mailto:PLUG-discuss@lists.phxlinux.org>
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> <mailto:PLUG-discuss@lists.phxlinux.org>
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> <mailto:PLUG-discuss@lists.phxlinux.org>
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)