Cox modems will learn and allow only 1 mac at a time (unless business is
set to allow more, but not on residential). If switching out firewalls, I
99% of time reboot the modem first and foremost.
-mb
On Sun, May 3, 2020 at 12:08 PM Snyder, Alexander J via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
> I got it working.
>
> I assigned the SFP+ port as my LAN and assigned it the 10.x.x.x/16
> network. Then I had to call COX and list the WAN Mac address with them.
> Upon doing so I was able to reach external sites, and all downstream
> devices started coming alive!
>
> Thanks for all the suggestions and help!
>
> Thanks,
> Alexander
>
> Sent from my Galaxy S10+
>
> On Sun, May 3, 2020, 03:14 Herminio Hernandez, Jr. via PLUG-discuss <
> plug-discuss@lists.phxlinux.org> wrote:
>
>> Can you login to the FW via the LAN interface? Can you ping the FW LAN
>> interface? Check the routing and NAT policy on the FW. All outbound traffic
>> should NAT to the FW WAN interface and there should be a default (
>> 0.0.0.0/0) route to the internet.
>>
>> On Sat, May 2, 2020 at 7:27 PM Seabass via PLUG-discuss <
>> plug-discuss@lists.phxlinux.org> wrote:
>>
>>> I'm with Mac, I think it is not the firewall, but if you have the
>>> ability to plug it into a display with a keyboard, you can use that for
>>> configuration and modify a different device at the same time.
>>>
>>> Makes it easier to troubleshoot by giving you the ability to configure
>>> your pfSense ports at the same time.
>>>
>>>
>>>
>>> Message: 2
>>> Date: Sat, 2 May 2020 09:04:35 -0700
>>> From: Donald Mac McCarthy <mac@oscontext.com>
>>> To: "Snyder, Alexander J via PLUG-discuss"
>>> <plug-discuss@lists.phxlinux.org>
>>> Subject: Re: pfSense + Ubiquity
>>> Message-ID: <18adfa38-3e72-7b0a-e31a-1ddf175d717f@oscontext.com>
>>> Content-Type: text/plain; charset="utf-8"
>>>
>>> I can help - but I am unavailable to do so until tomorrow.
>>>
>>> Make sure there are not any thing other than default VLANs on the
>>> interfaces to start with. Ubiquiti is famous for not havinght eSFP+
>>> ports active in the default configuration, and I believe the switch has
>>> all the ports to shutdown on default config as well.
>>>
>>> I think it is the switch not passing traffic through - no the firewall.
>>>
>>> Mac
>>> Snyder, Alexander J via PLUG-discuss wrote on 5/2/20 8:53 AM:
>>> > Does anyone out there have experience with pfSence and Ubiquity
>>> switches?
>>> >
>>> > I have zero with either but that didn't stop me from buying both ....
>>> > how hard could it be?! LOL.
>>> >
>>> > I bought a Negate XG-1537-1U. I bought a Unifi Pro 24 PoE switch.
>>> >
>>> > I can configure the FW immediately after
>>> > firstboot/restore-default-configs, but only if i set the LAN interface
>>> > to be the cable that goes directly to my laptop. That's great, but
>>> > that does shit for the downstream switch.
>>> >
>>> > I have a 10GB SFP+ Port that I want to configure as the downstream
>>> > port to ubiquity, but any configuration other than mentioned above
>>> > fails .... and I'm now on my 12th "Reset To Factory Defaults" ... any
>>> > help on this would be greatly appreciated!
>>> >
>>> > Thanks,
>>> > Alexander
>>> >
>>> > Sent from my Galaxy S10+
>>> >
>>> >
>>> > ---------------------------------------------------
>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>> > To subscribe, unsubscribe, or to change your mail settings:
>>> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>> --
>>> Donald "Mac" McCarthy
>>> Director, Field Operations
>>> Open Source Context
>>> +1.602.584.4445
>>> mac@oscontext.com
>>> https://oscontext.com
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <
>>> http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20200502/aeab14b4/attachment-0001.html
>>> >
>>>
>>> ------------------------------
>>>
>>> Subject: Digest Footer
>>>
>>> _______________________________________________
>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>>
>>> ------------------------------
>>>
>>> End of PLUG-discuss Digest, Vol 179, Issue 2
>>> ********************************************
>>>
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)