Can you login to the FW via the LAN interface? Can you ping the FW LAN
interface? Check the routing and NAT policy on the FW. All outbound traffic
should NAT to the FW WAN interface and there should be a default (0.0.0.0/0)
route to the internet.
On Sat, May 2, 2020 at 7:27 PM Seabass via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
> I'm with Mac, I think it is not the firewall, but if you have the ability
> to plug it into a display with a keyboard, you can use that for
> configuration and modify a different device at the same time.
>
> Makes it easier to troubleshoot by giving you the ability to configure
> your pfSense ports at the same time.
>
>
>
> Message: 2
> Date: Sat, 2 May 2020 09:04:35 -0700
> From: Donald Mac McCarthy <mac@oscontext.com>
> To: "Snyder, Alexander J via PLUG-discuss"
> <plug-discuss@lists.phxlinux.org>
> Subject: Re: pfSense + Ubiquity
> Message-ID: <18adfa38-3e72-7b0a-e31a-1ddf175d717f@oscontext.com>
> Content-Type: text/plain; charset="utf-8"
>
> I can help - but I am unavailable to do so until tomorrow.
>
> Make sure there are not any thing other than default VLANs on the
> interfaces to start with. Ubiquiti is famous for not havinght eSFP+
> ports active in the default configuration, and I believe the switch has
> all the ports to shutdown on default config as well.
>
> I think it is the switch not passing traffic through - no the firewall.
>
> Mac
> Snyder, Alexander J via PLUG-discuss wrote on 5/2/20 8:53 AM:
> > Does anyone out there have experience with pfSence and Ubiquity switches?
> >
> > I have zero with either but that didn't stop me from buying both ....
> > how hard could it be?! LOL.
> >
> > I bought a Negate XG-1537-1U. I bought a Unifi Pro 24 PoE switch.
> >
> > I can configure the FW immediately after
> > firstboot/restore-default-configs, but only if i set the LAN interface
> > to be the cable that goes directly to my laptop. That's great, but
> > that does shit for the downstream switch.
> >
> > I have a 10GB SFP+ Port that I want to configure as the downstream
> > port to ubiquity, but any configuration other than mentioned above
> > fails .... and I'm now on my 12th "Reset To Factory Defaults" ... any
> > help on this would be greatly appreciated!
> >
> > Thanks,
> > Alexander
> >
> > Sent from my Galaxy S10+
> >
> >
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> > To subscribe, unsubscribe, or to change your mail settings:
> > https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
> --
> Donald "Mac" McCarthy
> Director, Field Operations
> Open Source Context
> +1.602.584.4445
> mac@oscontext.com
> https://oscontext.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20200502/aeab14b4/attachment-0001.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
> ------------------------------
>
> End of PLUG-discuss Digest, Vol 179, Issue 2
> ********************************************
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)