Yeah, I have to admit that Hugin is the main reason that my computer has so much RAM.
Brian Cluff
On March 12, 2016 11:16:06 AM MST, Michael <
bmike1@gmail.com> wrote:
>Thanks, Brian. I bought the computer from a friend for $60 so I wasn't
>expecting much. Actually this thing has run fine until I started laying
>with Hugin!
>
>On Sat, Mar 12, 2016 at 1:13 PM, Brian Cluff <brian@snaptek.com> wrote:
>
>> I'm guessing you are nowhere near maxed out. It says you have 2
>empty
>> DIMM slots, and the other 2 slots only have 2 gig DIMMs in them, so
>I'm
>> guessing that you can probably put bare minimum of double the memory
>you
>> have now and probably at least 4X times memory you have now if you
>outright
>> replace the DIMMs with 4 gig sticks.
>>
>> Brian Cluff
>>
>>
>> On 03/12/2016 11:04 AM, Michael wrote:
>>
>>> I got some jobs that are making me a little money (finally) so I can
>>> make my computer better. I was stitching some photographs together
>and
>>> before hugin started to do it's thing it said I didn't have enough
>>> memory to run four threads but enough to run only one. How can I
>tell if
>>> my memory is maxed?
>>> The attachment is lshw (I think that is what I need to do) and
>this is
>>> what I think is the correct section:
>>>
>>> *-memory
>>> description: System Memory
>>> physical id: 28
>>> slot: System board or motherboard
>>> size: 4GiB
>>> *-bank:0
>>> description: DIMM 800 MHz (1.2 ns)
>>> product: None
>>> vendor: None
>>> physical id: 0
>>> serial: None
>>> slot: A0
>>> size: 2GiB
>>> width: 64 bits
>>> clock: 800MHz (1.2ns)
>>> *-bank:1
>>> description: DIMM 800 MHz (1.2 ns)
>>> product: None
>>> vendor: None
>>> physical id: 1
>>> serial: None
>>> slot: A1
>>> size: 2GiB
>>> width: 64 bits
>>> clock: 800MHz (1.2ns)
>>> *-bank:2
>>> description: DIMM 800 MHz (1.2 ns) [empty]
>>> product: None
>>> vendor: None
>>> physical id: 2
>>> serial: None
>>> slot: A2
>>> width: 64 bits
>>> clock: 800MHz (1.2ns)
>>> *-bank:3
>>> description: DIMM 800 MHz (1.2 ns) [empty]
>>> product: None
>>> vendor: None
>>> physical id: 3
>>> serial: None
>>> slot: A3
>>> width: 64 bits
>>> clock: 800MHz (1.2ns)
>>> *-pci:0
>>> description: Host bridge
>>> product: RS880 Host Bridge
>>> vendor: Advanced Micro Devices, Inc. [AMD]
>>> physical id: 100
>>> bus info: pci@0000:00:00.0
>>> version: 00
>>> width: 64 bits
>>> clock: 66MHz
>>> configuration: latency=32
>>> *-pci:0
>>> description: PCI bridge
>>> product: RS780 PCI to PCI bridge (ext gfx port 0)
>>> vendor: Advanced Micro Devices, Inc. [AMD]
>>> physical id: 2
>>> bus info: pci@0000:00:02.0
>>> version: 00
>>> width: 32 bits
>>> clock: 33MHz
>>> capabilities: pci pm pciexpress msi ht normal_decode
>>> bus_master cap_list
>>> configuration: driver=pcieport
>>> resources: irq:24 ioport:e000(size=4096)
>>> memory:fdf00000-fdffffff ioport:d0000000(size=268435456)
>>> *-display
>>> description: VGA compatible controller
>>> product: RV770 [Radeon HD 4850]
>>> vendor: Advanced Micro Devices, Inc. [AMD/ATI]
>>> physical id: 0
>>> bus info: pci@0000:01:00.0
>>> version: 00
>>> width: 64 bits
>>> clock: 33MHz
>>> capabilities: pm pciexpress msi vga_controller
>>> bus_master cap_list rom
>>> configuration: driver=radeon latency=0
>>> resources: irq:27 memory:d0000000-dfffffff
>>> memory:fdfe0000-fdfeffff ioport:ee00(size=256)
>memory:fdf00000-fdf1ffff
>>> *-multimedia
>>> description: Audio device
>>> product: RV770 HDMI Audio [Radeon HD 4850/4870]
>>> vendor: Advanced Micro Devices, Inc. [AMD/ATI]
>>> physical id: 0.1
>>> bus info: pci@0000:01:00.1
>>> version: 00
>>> width: 64 bits
>>> clock: 33MHz
>>> capabilities: pm pciexpress msi bus_master cap_list
>>> configuration: driver=snd_hda_intel latency=0
>>> resources: irq:28 memory:fdffc000-fdffffff
>>> *-pci:1
>>> description: PCI bridge
>>> product: RS780/RS880 PCI to PCI bridge (PCIE port 5)
>>> vendor: Advanced Micro Devices, Inc. [AMD]
>>> physical id: a
>>> bus info: pci@0000:00:0a.0
>>> version: 00
>>> width: 32 bits
>>> clock: 33MHz
>>> capabilities: pci pm pciexpress msi ht normal_decode
>>> bus_master cap_list
>>> configuration: driver=pcieport
>>> resources: irq:25 ioport:d000(size=4096)
>>> memory:fde00000-fdefffff ioport:fdb00000(size=1048576)
>>> *-network
>>> description: Ethernet interface
>>> product: RTL8111/8168/8411 PCI Express Gigabit
>Ethernet
>>> Controller
>>> vendor: Realtek Semiconductor Co., Ltd.
>>> physical id: 0
>>> bus info: pci@0000:02:00.0
>>> logical name: eth0
>>> version: 02
>>> serial: 6c:f0:49:02:01:01
>>> size: 1Gbit/s
>>> capacity: 1Gbit/s
>>> width: 64 bits
>>> clock: 33MHz
>>> capabilities: pm msi pciexpress msix vpd bus_master
>>> cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd
>1000bt
>>> 1000bt-fd autonegotiation
>>> configuration: autonegotiation=on broadcast=yes
>>> driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.2
>>> latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
>>> resources: irq:26 ioport:de00(size=256)
>>> memory:fdbff000-fdbfffff memory:fdbe0000-fdbeffff
>memory:fde00000-fde0ffff
>>>
>>>
>>> --
>>> :-)~MIKE~(-:
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
>
>--
>:-)~MIKE~(-:
>
>
>------------------------------------------------------------------------
>
>---------------------------------------------------
>PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>To subscribe, unsubscribe, or to change your mail settings:
>http://lists.phxlinux.org/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss