Yeah, I have to admit that Hugin is the main reason that my computer has so much RAM. Brian Cluff On March 12, 2016 11:16:06 AM MST, Michael wrote: >Thanks, Brian. I bought the computer from a friend for $60 so I wasn't >expecting much. Actually this thing has run fine until I started laying >with Hugin! > >On Sat, Mar 12, 2016 at 1:13 PM, Brian Cluff wrote: > >> I'm guessing you are nowhere near maxed out. It says you have 2 >empty >> DIMM slots, and the other 2 slots only have 2 gig DIMMs in them, so >I'm >> guessing that you can probably put bare minimum of double the memory >you >> have now and probably at least 4X times memory you have now if you >outright >> replace the DIMMs with 4 gig sticks. >> >> Brian Cluff >> >> >> On 03/12/2016 11:04 AM, Michael wrote: >> >>> I got some jobs that are making me a little money (finally) so I can >>> make my computer better. I was stitching some photographs together >and >>> before hugin started to do it's thing it said I didn't have enough >>> memory to run four threads but enough to run only one. How can I >tell if >>> my memory is maxed? >>> The attachment is lshw (I think that is what I need to do) and >this is >>> what I think is the correct section: >>> >>> *-memory >>> description: System Memory >>> physical id: 28 >>> slot: System board or motherboard >>> size: 4GiB >>> *-bank:0 >>> description: DIMM 800 MHz (1.2 ns) >>> product: None >>> vendor: None >>> physical id: 0 >>> serial: None >>> slot: A0 >>> size: 2GiB >>> width: 64 bits >>> clock: 800MHz (1.2ns) >>> *-bank:1 >>> description: DIMM 800 MHz (1.2 ns) >>> product: None >>> vendor: None >>> physical id: 1 >>> serial: None >>> slot: A1 >>> size: 2GiB >>> width: 64 bits >>> clock: 800MHz (1.2ns) >>> *-bank:2 >>> description: DIMM 800 MHz (1.2 ns) [empty] >>> product: None >>> vendor: None >>> physical id: 2 >>> serial: None >>> slot: A2 >>> width: 64 bits >>> clock: 800MHz (1.2ns) >>> *-bank:3 >>> description: DIMM 800 MHz (1.2 ns) [empty] >>> product: None >>> vendor: None >>> physical id: 3 >>> serial: None >>> slot: A3 >>> width: 64 bits >>> clock: 800MHz (1.2ns) >>> *-pci:0 >>> description: Host bridge >>> product: RS880 Host Bridge >>> vendor: Advanced Micro Devices, Inc. [AMD] >>> physical id: 100 >>> bus info: pci@0000:00:00.0 >>> version: 00 >>> width: 64 bits >>> clock: 66MHz >>> configuration: latency=32 >>> *-pci:0 >>> description: PCI bridge >>> product: RS780 PCI to PCI bridge (ext gfx port 0) >>> vendor: Advanced Micro Devices, Inc. [AMD] >>> physical id: 2 >>> bus info: pci@0000:00:02.0 >>> version: 00 >>> width: 32 bits >>> clock: 33MHz >>> capabilities: pci pm pciexpress msi ht normal_decode >>> bus_master cap_list >>> configuration: driver=pcieport >>> resources: irq:24 ioport:e000(size=4096) >>> memory:fdf00000-fdffffff ioport:d0000000(size=268435456) >>> *-display >>> description: VGA compatible controller >>> product: RV770 [Radeon HD 4850] >>> vendor: Advanced Micro Devices, Inc. [AMD/ATI] >>> physical id: 0 >>> bus info: pci@0000:01:00.0 >>> version: 00 >>> width: 64 bits >>> clock: 33MHz >>> capabilities: pm pciexpress msi vga_controller >>> bus_master cap_list rom >>> configuration: driver=radeon latency=0 >>> resources: irq:27 memory:d0000000-dfffffff >>> memory:fdfe0000-fdfeffff ioport:ee00(size=256) >memory:fdf00000-fdf1ffff >>> *-multimedia >>> description: Audio device >>> product: RV770 HDMI Audio [Radeon HD 4850/4870] >>> vendor: Advanced Micro Devices, Inc. [AMD/ATI] >>> physical id: 0.1 >>> bus info: pci@0000:01:00.1 >>> version: 00 >>> width: 64 bits >>> clock: 33MHz >>> capabilities: pm pciexpress msi bus_master cap_list >>> configuration: driver=snd_hda_intel latency=0 >>> resources: irq:28 memory:fdffc000-fdffffff >>> *-pci:1 >>> description: PCI bridge >>> product: RS780/RS880 PCI to PCI bridge (PCIE port 5) >>> vendor: Advanced Micro Devices, Inc. [AMD] >>> physical id: a >>> bus info: pci@0000:00:0a.0 >>> version: 00 >>> width: 32 bits >>> clock: 33MHz >>> capabilities: pci pm pciexpress msi ht normal_decode >>> bus_master cap_list >>> configuration: driver=pcieport >>> resources: irq:25 ioport:d000(size=4096) >>> memory:fde00000-fdefffff ioport:fdb00000(size=1048576) >>> *-network >>> description: Ethernet interface >>> product: RTL8111/8168/8411 PCI Express Gigabit >Ethernet >>> Controller >>> vendor: Realtek Semiconductor Co., Ltd. >>> physical id: 0 >>> bus info: pci@0000:02:00.0 >>> logical name: eth0 >>> version: 02 >>> serial: 6c:f0:49:02:01:01 >>> size: 1Gbit/s >>> capacity: 1Gbit/s >>> width: 64 bits >>> clock: 33MHz >>> capabilities: pm msi pciexpress msix vpd bus_master >>> cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd >1000bt >>> 1000bt-fd autonegotiation >>> configuration: autonegotiation=on broadcast=yes >>> driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.2 >>> latency=0 link=yes multicast=yes port=MII speed=1Gbit/s >>> resources: irq:26 ioport:de00(size=256) >>> memory:fdbff000-fdbfffff memory:fdbe0000-fdbeffff >memory:fde00000-fde0ffff >>> >>> >>> -- >>> :-)~MIKE~(-: >>> >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >>> >>> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.phxlinux.org/mailman/listinfo/plug-discuss >> > > > >-- >:-)~MIKE~(-: > > >------------------------------------------------------------------------ > >--------------------------------------------------- >PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org >To subscribe, unsubscribe, or to change your mail settings: >http://lists.phxlinux.org/mailman/listinfo/plug-discuss