Could someone help me verify that the entire hard drive was copied?
This is the message at the end of the copying:
29302560+0 records in
29302560+0 records out
30005821440 bytes (30 GB) copied, 6036.72 seconds, 5.0 MB/s
16656403+379 records in
16656403+379 records out
17056356977 bytes (17 GB) copied, 6036.63 seconds, 2.8 MB/s
The resulting image is only 16GB for a 30 GB drive. I know I used compression,
but I just want to make sure it worked. It does say 30Gb copied.
Just looking for some comfort before I wipe out this drive!
Thanks!
Mark
P.S. No warrenty expected, just a "feel good" comment!
On Thursday 05 April 2007 15:51, George Toft wrote:
> Method 1:
> 1. Boot a knoppix cd
> 2. Open a root terminal window and issue this command:
> dd if=/dev/hda | ssh user@someremotehost "> /path/to/file/backup.img"
>
>
> Method 2:
> Trinity - clone NTFS filesystems over the network
> http://trinityhome.org/Home/index.php?wpid=1&front_id=12
>
>
>
> Keep in mind you will be limited by your network or disk drive.
> Experience has shown this takes a really long time for a large drive.
> If you want to watch the progress:
> 1. Log into someremotebox and issue this command:
> watch "ls -lh /path/to/file/*"
>
>
>
> To copy the image from the remote box:
> ssh user@someremotehost "cat /path/to/file/backup.img" | dd of=/dev/hda
>
>
>
>
> George Toft, CISSP, MSIS
> 623-203-1760
>
> Mark Phillips wrote:
> > I have a laptop that dual boots Windows and Debian. I need to make a
> > complete backup of the entire drive. I have another Windows XP machine on
> > my network (or another Debian machine) with some extra disk space, so I
> > would like to create an image of the disk drive and store it there. I
> > then want to restore it later. How do I do that?
> >
> > I have been googling around for "hard drive backup" and "partition
> > backup". I found a few options, tested them on the Window 200 partition,
> > and they don't seem to be able to do the job. One problem I have is that
> > Windows 2000 does not see the Linux partition and Debian does not see the
> > Windows 2000 partition. Based on what I read, I should unmount the drive
> > I am copying - is this true?
> >
> > I am not enough of a Linux guru to figure out how to use dd across the
> > network. Can I run dd on the system I am imaging?
> >
> > Can I do this with a knoppix CD? Is there a howto somewhere? I couldn't
> > find it.
> >
> > Thanks!
> >
> > Mark
> > ---------------------------------------------------
> > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> > To subscribe, unsubscribe, or to change you mail settings:
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)