Make sure your ethernet adapters on your PCs are set to fixed 100mb/full
duplex. Then set the ports to the same. Your problem could be in the
auto-negotiation.
Also, make sure that you do a manual "no shutdown" on the ports you want.
When you plug in the cables, do you have green ports or amber?
; ) .randy
On 12/28/06, Gilbert T. Gutierrez, Jr. <
plug@phxinternet.net> wrote:
>
> You want to use VLAN 1.
>
> The Ethernet Interface should look something like the following...
> interface FastEthernet0/1
> switchport mode dynamic desirable
>
> Program VLAN1...
> interface Vlan1
> description Management Interface
> ip address a.b.c.d x.x.x.x
> no ip redirects
> no ip unreachables
> no ip proxy-arp
> end
>
> VLAN 1 should be enabled by default but to check type the "show
> vlan". This
> should tell you which ports are on what VLANs.
>
> Tell me if this helps,
> Gilbert
>
> -----Original Message-----
> From: plug-discuss-bounces@lists.plug.phoenix.az.us
> [mailto:plug-discuss-bounces@lists.plug.phoenix.az.us] On Behalf Of JT
> Moree
> Sent: Thursday, December 28, 2006 3:04 PM
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: configuring cisco catalyst 4500
>
> Has anyone ever configured a cisco catalyst 4500? We have erased it to
> reset it
> to defaults (bc we didn't have the password) and can't seem to get it to
> do
> anything. We have tried configuring dhcp on it by setting up a pool and
> turning the service on. We have tried to assign ip addresses to ports
> manually. We have tried setting up vlans. nothing works. The two test
> machines we plug in can NEVER see each other (static ip's or by requesting
> dhcp
> from the switch). the dhcp stats on the switch never change so it's not
> even
> seeing the requests from the machines.
>
> How do we turn on the ports so that they can use dhcp?
>
> --
> JT Moree
> www.pcxperience.com
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
> MailScanner thanks transtec Computers for their support.
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> ---
> [ This E-mail was scanned for viruses by Phoenix Internet ]
> [ Phoenix Internet http://www.phoenixinternet.net ]
>
>
> ---
> [ This E-mail was scanned for viruses by Phoenix Internet ]
> [ Phoenix Internet http://www.phoenixinternet.net ]
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
--
http://spindomains.us/
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)