Some people have asked for more info on the cisco switch. Here it is.
The password recovery isn't the problem. as far as we can tell we can
get into the switch to do anything we need. The problem seems to be
that we can't get it out of the current configuration even though we
have tried to reset it to factory defaults with various commands and guides.
No matter what we do the show run command still shows the old
configuration. and as I said before the switch just wont let systems
communicate (bc it's misconfigured.)
Thank you
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
Switch#show ip arp
Switch#show mac address table
^
% Invalid input detected at '^' marker.
Switch#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
Switch#sh run
Building configuration...
Current configuration : 5080 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
!
vtp domain BLIMPIE
vtp mode transparent
ip subnet-zero
!
spanning-tree extend system-id
!
!
vlan 2
name SERVER
!
vlan 3
name ACCESS
!
vlan 4
name VOIP
!
vlan 5
name CLASSROOM
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface GigabitEthernet2/1
!
interface GigabitEthernet2/2
!
interface GigabitEthernet2/3
!
interface GigabitEthernet2/4
!
interface GigabitEthernet2/5
!
interface GigabitEthernet2/6
<snip>
interface GigabitEthernet4/48
!
interface Vlan1
no ip address
!
ip classless
no ip http server
!
!
line con 0
stopbits 1
line vty 0 4
!
end
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss