On Thursday 24 March 2005 03:30 pm, Lee Einer wrote:
> Hi, Siri-
>
> Your dmesg file indicates that the drive is detected on start-up, and
> hdd is the assigned device name. It is trying to mount to /mnt/cdrom1,
> so you could check your /mnt directory to make sure you have a
> /mnt/cdrom1, but I'm sure you do. If not, you can create one. Assuming
> that you do have a /mnt/cdrom1, the command for mounting, I think, would be
>
> (as root or sudo)
>
>
> mount /dev/hdd /mnt/cdrom1
root@localhost:~# mount /dev/hdd /mnt/cdrom1
mount: permission denied
I looked at the /mnt directory cdrom1 and cannot change permissions on it. It
is user=root, group=root. I wanted to change it to group=cdrom.
>
> The problem, though, is that the drive does not appear to be reading the
> discs. If it were, after you inserted the disc and closed the drive you
> would get a flashing light for a few seconds, at least.
I do have a light for a few seconds.
>
> Has this been the case since you installed the second CDROM drive?
It used to work fine. I used it for ripping to save my burner the work. I used
it for playback of audio disks to make sure my burns went well. It's an Antec
56X. It hasn't had all that much use. Haven't changed the jumpers or cable or
anything.
> I
> would check all the connections and also verify that it is correctly
> jumpered, just to be sure, and if that doesn't work, I would swap it
> with a functioning CD-ROM drive and see if that doesn't address the
> problem. I think it will.
>
> Hope all goes well,
>
> Lee
>
> Siri Amrit Kaur wrote:
> >Is this what you need to see? From /var/log/dmesg:
> >
> >Probing IDE interface ide0...
> >hda: ST340016A, ATA DISK drive
> >hdb: ST320414A, ATA DISK drive
> >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >Probing IDE interface ide1...
> >hdc: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
> >hdd: CD-ROM 56X L, ATAPI CD/DVD-ROM drive
> >ide1 at 0x170-0x177,0x376 on irq 15
> >Probing IDE interface ide2...
> >Probing IDE interface ide3...
> >Probing IDE interface ide4...
> >Probing IDE interface ide5...
> >hda: max request size: 128KiB
> >hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63,
> > UDMA(100) hda: cache flushes not supported
> > hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
> >hdb: max request size: 128KiB
> >hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63,
> > UDMA(100) hdb: cache flushes not supported
> > hdb: unknown partition table
> >hdd: ATAPI 56X CD-ROM drive, 128kB Cache, UDMA(33)
> >
> >(end dmesg)
> >
> >FWIW, I had this problem before I changed the system to use supermount. I
> > have the same problem of nothing showing up in the drive in Vector Linux,
> > too, which doesn't use supermount. I'm starting to think it's a dead
> > drive...
> >
> >Siri Amrit
> >
> >>On Thu, 24 Mar 2005, Siri Amrit Kaur wrote:
> >>>root@localhost:~# dmesg | grep CD
> >>
> >>Nothing there. So no reason to continue to next step. See if your boot
> >>kernel messages (dmesg output) is saved at boot time and check there. Or
> >>manually look at "dmesg | more" to find your CD.
> >>
> >>>root@localhost:~# mount -t iso9660 /dev/hdd /mnt
> >>>mount: No medium found
> >>
> >>/dev/hdd may be wrong. Your kernel's boot messages will tell you where
> >>your CD is.
> >>
> >>>root@localhost:~# ls -la /mnt
> >>
> >>You can skip this step, because previous step failed.
> >>
> >>(If you are curious, your /mnt can be remounted to hide the contents that
> >>you did see.)
> >>
> >>As for disabling supermount, maybe have a look at "man supermount".
> >>(Hopefully, it explains it.)
> >>
> >> Jeremy C. Reed
> >>
> >> open source, Unix, *BSD, Linux training
> >> http://www.pugetsoundtechnology.com/
> >>
> >>
> >>---------------------------------------------------
> >>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> >>To subscribe, unsubscribe, or to change you mail settings:
> >>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> >---------------------------------------------------
> >PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> >To subscribe, unsubscribe, or to change you mail settings:
> >http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)