Well, I got it (AOPEN CRW1232) but don't really know how to get
it installed. After googling I found that I am supposed to to add
to append in lilo.conf 'hdd=ide-scsi' which I did. I then rebooted
and found that while that may have been part of the solution it made
no noticable difference to me.
I think the computer sees it. dmesg gives:
hdd: AOPEN CRW1232, ATAPI CD/DVD-ROM drive
Very cool! sudo k3b started the burner program and the output
messages indicate that it sees the burner (1). Then a window opens
saying "Could not start process Unknown protocol 'file'." and
'Could not find mime type application/octet-stream'. Then the program
crashes.
Well look at that! At the bottom of 1- it seems that the first CDROM has
many more aliases than the new one. Could that be a problem.
--
<:-)Mike(-:>
1-
bmike1@0[bmike1]$ sudo k3b
(K3bExternalBinManager) Cdrecord 2.1a19 features: gracetime, overburn, cdtext, -snip-
clone, cuefile, suidroot, plain-atapi, hacked-atapi
(K3bExternalBinManager) 2 1 -1 a19 seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
(K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
/dev/sr0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
bus: 0, id: 0, lun: 0
(K3bCdDevice) /dev/scd0: init()
(K3bCdDevice::ScsiCommand) failed: fd: 11 errorcode: p
(K3bCdDevice) /dev/scd0: GET_CONFIGURATION failed.
/dev/scd0 resolved to /dev/scd0
/dev/scd0 is block device (0)
/dev/scd0 seems to be cdrom
(K3bDeviceManager) dev /dev/scd0 already found
/dev/hdd resolved to /dev/hdd
/dev/hdd is block device (64)
/dev/hdd seems to be cdrom
(K3bCdDevice) /dev/hdd: init()
(K3bCdDevice::ScsiCommand) failed: fd: 11 errorcode: p
(K3bCdDevice) /dev/hdd: GET_CONFIGURATION failed.
(K3bCdDevice::CdDevice) /dev/hdd: dataLen: 60
(K3bCdDevice::CdDevice) /dev/hdd: modesense data:
(K3bCdDevice::CdDevice) /dev/hdd: modeselect TAO data:
(K3bCdDevice::ScsiCommand) failed: fd: 11 errorcode: p
(K3bCdDevice::ScsiCommand) failed: fd: 11 errorcode: p
linux kernel version: 2.4.22
0linux kernel version: 2.4.22
(K3bDeviceManager) probing capabilities for device /dev/hdd
(K3bDeviceManager) setting current write speed of device /dev/hdd to 12
(K3bDeviceManager) Link: /dev/cdaudio -> /dev/scd0
(K3bDeviceManager) Link: /dev/cdrom -> /dev/scd0
(K3bDeviceManager) Link: /dev/sr0 -> /dev/scd0
(K3bDeviceManager) scanning fstab: /dev/hda2
(K3bDeviceManager) scanning fstab: /dev/sda1
bus: 1, id: 0, lun: 0
(K3bDeviceManager) scanning fstab: proc
Could not resolve proc
could not open device proc (No such file or directory)
(K3bDeviceManager) scanning fstab: devpts
Could not resolve devpts
could not open device devpts (No such file or directory)
(K3bDeviceManager) scanning fstab: /dev/hda1
(K3bDeviceManager) scanning fstab: /dev/hda3
(K3bDeviceManager) scanning fstab: /dev/hda4
(K3bDeviceManager) scanning fstab: /dev/hda2
(K3bDeviceManager) scanning fstab: /dev/sda1
bus: 1, id: 0, lun: 0
(K3bDeviceManager) scanning fstab: proc
Could not resolve proc
could not open device proc (No such file or directory)
(K3bDeviceManager) scanning fstab: devpts
Could not resolve devpts
could not open device devpts (No such file or directory)
(K3bDeviceManager) scanning fstab: /dev/hda1
(K3bDeviceManager) scanning fstab: /dev/hda3
(K3bDeviceManager) scanning fstab: /dev/hda4
Devices:
------------------------------
Blockdevice: /dev/scd0
Vendor: BCD 40XH
Description: CD-ROM
Version: U3.1
MountDevice:
Mountpoint:
Write speed: 0
Profiles: Error
Devicetype: CD-ROM
Writing modes: None
Reader aliases: /dev/scd0, /dev/cdaudio, /dev/cdrom, /dev/sr0
------------------------------
Blockdevice: /dev/hdd
Vendor: AOPEN
Description: CRW1232
Version: 1.22
MountDevice:
Mountpoint:
Write speed: 12
Profiles: Error
Devicetype: CD-R; CD-RW; CD-ROM
Writing modes: SAO; TAO; RAW; RAW/R96R
Reader aliases: /dev/hdd
------------------------------
---------------------------------
It looks like dcopserver is already running. If you are sure
that it is not already running, remove /home/bmike1/.DCOPserver_mepis1__0
and start dcopserver again.
---------------------------------
WARNING: Already running!
kdeinit: Communication error with launcher. Exiting!
ERROR: ERROR 3: couldn't create slave : Unknown protocol 'file'.
KDE Daemon (kded) already running.
ERROR: (K3bSongManager) Can't open file /root/.kde/share/apps/k3b/songlist.xml
bmike1@0[bmike1]$
This message has been scanned for viruses by the VEI Internet
Automatic Email Spam and Virus Scanner, and is believed to be free of spam or viruses.
Please report spam to
spamtrap@vei.net. If you would like 98.9 % spam blocked from your
E-mail then go to VEI Internet for details. Anti-spam/Anti-virus is FREE with every account.
http://www.vei.net/
mailtospamtrap@vei.net
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)