I have a Raspberry Pi4 and I've had trouble with some adapters for some
sata ssds I've tried using with it. I have several usb3 adapters that
don't support uasp. When I try using one, the speeds are slow and I get
lots of errors. I looked this up online and everything I saw about it
said that some usb3 ssd adapters don't support uasp and a system trying
to use it will get slow speeds and lots of errors. Some of the stuff I
read says how to get the manufacturer and model id numbers and put them
in /boot/firmware/cmdline.txt so the system will not try using uasp with
those devices. In the cmdline.txt file on my Pi4, I have the following
at the front of cmdline.txt:
usb-storage-quirks-152d:0578:u (152d:0578 is the manufacturer and
device numbers for the device in question.)
This is supposed to tell the system not to use uasp on the specified
device. I tried that, and rebooted the pi, but still have the problem.
The only way I got it working was to plug the second drive into a usb2
port. It's a bit slower, but works.
Here it told how to identify the device and how to modify cmdline.txt to
tell the system not to use uasp with the device
https://forums.raspberrypi.com/viewtopic.php?t=245931
The cmdline.txt file starts with usb-storage-quirks-152d:0578:u
Typing lsusb identifies the device.
$ lsusb
Bus 002 Device 002: ID 14b0:0206 StarTech.com Ltd. Vi550 S3 This one
works. The drive the pi boots from is connected to it.
Bus 001 Device 003: ID 152d:0578 JMicron Technology Corp. / JMicron USA
Technology Corp. JMS578 SATA 6Gb/s This is the one I'm having trouble with.
It does not work without lots of errors. I only got it working by
putting it in a usb2 port. Is there any way to test whether or not a
device supports uasp?
Thanks for any help you can send my way.
---------------------------------------------------
PLUG-discuss mailing list:
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)