On 6/22/23 20:46, Michael Butash via PLUG-discuss wrote:
> Looks like it's just creating a generic usb serial port, so I'd
> presume you need to tell the program your hardware device serial
> speed, flow control, bits, etc and have it misconfigured currently
> it's erroring in that seeing bits it expects returned. Being legacy
> serial vs like a hardware sdr, this is not negotiated but rather needs
> set for your device requirements usually, but depending on your
> hardware that might not always be the same.
There's no way in CHIRP to set any of this. It gives me the option to
set a port. My options are /dev/ttyS0 - ttyS31 and /dev/ttyUSB0.
> Also make sure the port is actually running on /dev/ttyUSB0 and not
> USB1 or other, I've had this happen if a cable gets yanked or wiggled
> causing the device to reset too quickly and is already in use. Check
> using "dmesg | grep usbTTY" to make sure the number.
dmesg | grep usbTTY provided no results, but "dmesg | grep usbTTY"
returned the following:
[19805.739059] usb 3-4.3: pl2303 converter now attached to ttyUSB0
> -mb
>
>
> On Thu, Jun 22, 2023 at 4:37 PM Jim via PLUG-discuss
> <plug-discuss@lists.phxlinux.org> wrote:
>
> I'm in need of help with Chirp on Kubuntu 22.04. CHIRP is a program
> that allows for easy programming of a transceiver and for backing
> up the
> configuration of the radio in question. I've used it before I
> upgraded
> to 22.04 and it worked. Now it doesn't. I have the port set to
> /dev/ttyUSB0. I give CHIRP the correct vendor and model
> information.
> Then I click download. Chirp shows nothing, but the radio says TX
> and a
> progress bar then Clone OK when it's done. This is what should
> happen.
> However Chirp should also show a progress bar. However it does
> nothing. Instead it give me a dialog box that says:
>
> Error communicating with the radio
>
> module 'collections' has to attribute 'Callable"
>
> This suggests to me that Chirp is sending data to the radio that
> tells
> it to send its data to Chirp, but it acts like the computer isn't
> able
> to receive it. Does anyone know how to fix this?
>
>
> Thanks.
>
> ---------------------------------------------------
> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list:PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss---------------------------------------------------
PLUG-discuss mailing list:
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)