Okay.... I think I really screwed things up. YOu said:
$> fdisk /dev/sdb
$> Command > o
$> Command > n
$> Command > 1 (press enter 3times)
$> Command > t
$> Command > b
$> Command > w
$> Command > p
***The above didn't look like that. There was no '$>'
But I figured your computer was just configured differently
so I carried on!
bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo fdisk /dev/sdd
Command (m for help): o
Building a new DOS disklabel with disk identifier 0xf66cb38c.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
Using default value 1
First sector (2048-3913663, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-3913663, default 3913663):
Using default value 3913663
Command (m for help): 1
1: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): t
Selected partition 1
Hex code (type L to list codes):
Hex code (type L to list codes): w
Hex code (type L to list codes): ^[^[
Hex code (type L to list codes):
Hex code (type L to list codes):
^Cbmike1@PresarioLapTop1:/media/bmike1/OpenELEC$
sudo fdisk /dev/sdd
Command (m for help): o
Building a new DOS disklabel with disk identifier 0xbdd16f92.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): b
Invalid partition type `b'
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
Using default value 1
First sector (2048-3913663, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-3913663, default 3913663):
Using default value 3913663
Command (m for help): b
There is no *BSD partition on /dev/sdd.
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo fdisk /dev/sdd
Command (m for help): p
Disk /dev/sdd: 2003 MB, 2003795968 bytes
11 heads, 4 sectors/track, 88946 cylinders, total 3913664 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xbdd16f92
Device Boot Start End Blocks Id System
/dev/sdd1 2048 3913663 1955808 83 Linux
Command (m for help): ^[[B^[[A^[
[: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): q
sudo fdisk -l /dev/sdd1
Disk /dev/sdd1: 2001 MB, 2001731584 bytes
62 heads, 62 sectors/track, 1017 cylinders, total 3909632 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x20ac7dda
This doesn't look like a partition table
Probably you selected the wrong device.
Device Boot Start End Blocks Id System
/dev/sdd1p1 ? 3224498923 3657370039 216435558+ 7 HPFS/NTFS/exFAT
/dev/sdd1p2 ? 3272020941 930513678 976730017 16 Hidden FAT16
/dev/sdd1p3 ? 0 0 0 6f Unknown
/dev/sdd1p4 50200576 974536369 462167897 0 Empty
Partition table entries are not in disk order
****Now when I plug the USB drive in and it automounts nothing new appears
in the file manager. SO I ran another program to see what it says:
bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo sfdisk /dev/sdd
Checking that no-one is using this disk right now ...
OK
Disk /dev/sdd: 1018 cylinders, 62 heads, 62 sectors/track
Old situation:
Warning: The partition table looks like it was made
for C/H/S=*/11/4 (instead of 1018/62/62).
For this listing I'll assume that geometry.
Units = cylinders of 22528 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sdd1 46+ 88946- 88901- 1955808 83 Linux
start: (c,h,s) expected (46,6,1) found (1,78,9)
end: (c,h,s) expected (1023,10,4) found (34,10,4)
/dev/sdd2 0 - 0 0 0 Empty
/dev/sdd3 0 - 0 0 0 Empty
/dev/sdd4 0 - 0 0 0 Empty
Input in the following format; absent fields get a default value.
<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>
Usually you only need to specify <start> and <size> (and perhaps <type>).
/dev/sdd1 :?
trailing junk after number
/dev/sdd1 :
:-)~MIKE~(-:
On Tue, May 6, 2014 at 7:29 AM, Mike Ballon <
mike.ballon@gmail.com> wrote:
> First I was wrong to say that /dev/sdd1 would not exist it you simply
> unmounted it. I believe it can vary between a physical system and a VM.
>
> -- returns the memory stick i just plugged in and assigns device /dev/sdb
>
> $> dmesg
>
> [ 452.300827] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0
> PMAP PQ: 0 ANSI: 4
> [ 452.302226] sd 3:0:0:0: Attached scsi generic sg2 type 0
> [ 452.316528] sd 3:0:0:0: [sdb] 15240576 512-byte logical blocks: (7.80
> GB/7.26
>
> -- automount presents the stick to me because it has a file system
>
> $> mount | grep sdb
>
> /dev/sdb1 on /media/UNTITLED type vfat
>
> -- fdisk returns the partition info
>
> $> fdisk -l /dev/sdb
>
> Device Boot Start End Blocks Id System
> /dev/sdb1 2 15240575 7620287 b W95 FAT32
>
> -- use fdisk to delete the partition
>
> $> fdisk /dev/sdb
> $> Command > d
> $> Command > w
> $> Command > p
>
> Device Boot Start End Blocks Id System
>
> -- use fdisk to create the partition
>
> $> fdisk /dev/sdb
> $> Command > o
> $> Command > n
> $> Command > 1 (press enter 3times)
> $> Command > t
> $> Command > b
> $> Command > w
> $> Command > p
>
> Device Boot Start End Blocks Id System
> /dev/sdb1 2048 15240575 7619264 b W95 FAT32
>
> -- make the file system if needed, I say if needed because since the
> partition is exactly the same and the fs is the same, automount mounted the
> stick for me automagically
>
> $> umount /dev/sdb1
> $> mkfs.vfat /dev/sdb1
> $> mount /dev/sdb /mnt/foobar
> $> touch /mnt/foobar/test.txt
> $> ls /mnt/fobar
>
> test.txt
>
> -- oops forgot the renaming of volume, I'm on debian so
>
> $> apt-get install mtools
>
> Setting up mtools (4.0.17-1) ...
>
> $> mlabel -i /dev/sdb1 ::usb_stick
>
> again... gparted is your friend
>
>
> On Tue, May 6, 2014 at 9:42 AM, Mike Ballon <mike.ballon@gmail.com>wrote:
>
>> if you unmounted then /dev/sdd1 would no longer be there.
>>
>> Give me a few mins and I'll spin up a VM (I'm on a Mac) and I'll run
>> through all the steps for you.
>>
>>
>> On Tue, May 6, 2014 at 3:34 AM, Michael Havens <bmike1@gmail.com> wrote:
>>
>>> bummer.... new drive:
>>>
>>> mount
>>> ...
>>> /dev/sdd1 on /media/bmike1/OpenELEC type vfat
>>> (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
>>> <unmout device with file manager>
>>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo mkfs -t vfat
>>> /dev/sdd1
>>> mkfs.vfat 3.0.13 (30 Jun 2012)
>>> /dev/sdd1: No such file or directory
>>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$
>>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo mkfs -t vfat
>>> /dev/sdd1
>>> mkfs.vfat 3.0.13 (30 Jun 2012)
>>> /dev/sdd1: No such file or directory
>>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo e2label /dev/sdd1
>>> Pny2G
>>> e2label: No such file or directory while trying to open /dev/sdd1
>>> Couldn't find valid filesystem superblock.
>>>
>>> what am I doing wrong?
>>>
>>> :-)~MIKE~(-:
>>>
>>>
>>> On Mon, May 5, 2014 at 8:28 PM, Michael Havens <bmike1@gmail.com> wrote:
>>>
>>>> that wouldn't change a vfat system but it inspired the correct search
>>>> terms and I found 'dosfslabel'. Thanks for the help, man:D
>>>>
>>>> :-)~MIKE~(-:
>>>>
>>>>
>>>> On Mon, May 5, 2014 at 7:50 PM, Ryan Rix <ry@n.rix.si> wrote:
>>>>
>>>>> Yeah, you're right Mike.
>>>>>
>>>>> https://help.ubuntu.com/community/RenameUSBDrive#FAT16_and_FAT32
>>>>>
>>>>> Michael Havens <bmike1@gmail.com> writes:
>>>>> > same thing:
>>>>> >
>>>>> > sudo e2label /dev/sdd1 Goodwill
>>>>> > e2label: Bad magic number in super-block while trying to open
>>>>> > /dev/sdd1
>>>>> > Couldn't find valid filesystem superblock.
>>>>> >
>>>>> > could it be because it is a vfat file system? (while I love linux I
>>>>> > like to have the ability for my flash drives to be used on common
>>>>> > computers)
>>>>> >
>>>>> > :-)~MIKE~(-:
>>>>> >
>>>>> > On Mon, May 5, 2014 at 5:51 PM, Mike Ballon <mike.ballon@gmail.com>
>>>>> > wrote:
>>>>> >
>>>>> > It's I file system label so yes, you'll need to format. If there
>>>>> > is no partition will have to create a partition before you can do
>>>>> > a mkfs gparted should do all that for you
>>>>> >
>>>>> >
>>>>> >
>>>>> > On May 5, 2014 7:47 PM, "Michael Havens" <bmike1@gmail.com>
>>>>> wrote:
>>>>> >
>>>>> >
>>>>> > Thanks Mike. Does this error mean I need to format the drive?
>>>>> >
>>>>> >
>>>>> >
>>>>> > sudo e2label /dev/sdc1 Goodwill
>>>>> > e2label: Bad magic number in super-block while trying to open
>>>>> > /dev/sdc1
>>>>> > Couldn't find valid filesystem superblock.
>>>>> >
>>>>> >
>>>>> > This is what 'mount' shows sdc1 to be:
>>>>> >
>>>>> >
>>>>> >
>>>>> > /dev/sdc1 on /media/bmike1/OpenELEC type vfat
>>>>> >
>>>>> (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,
>>>>> > showexec,flush,uhelper=udisks2)
>>>>> >
>>>>> >
>>>>> > and to format this and apply the label it would be:
>>>>> >
>>>>> > mkfs -t vfat /dev/sdc1;e2label /dev/sdc1 Goodwill
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> > :-)~MIKE~(-:
>>>>> >
>>>>> >
>>>>> >
>>>>> > On Mon, May 5, 2014 at 4:08 PM, Mike Ballon
>>>>> > <mike.ballon@gmail.com> wrote:
>>>>> >
>>>>> >
>>>>> > e2label
>>>>> >
>>>>> >
>>>>> >
>>>>> >
>>>>> > On Mon, May 5, 2014 at 7:05 PM, Michael Havens
>>>>> > <bmike1@gmail.com> wrote:
>>>>> >
>>>>> >
>>>>> >
>>>>> > I have a few flash drives. When I plug them in to my
>>>>> > computer a name referring to that flash drive appears
>>>>> > in the file manager. I have two questions: the first
>>>>> > is how do I change that name? The second is how do I
>>>>> > set that name when I format the drive?
>>>>> >
>>>>> > :-)~MIKE~(-:
>>>>> >
>>>>> >
>>>>> > ---------------------------------------------------
>>>>> > PLUG-discuss mailing list -
>>>>> > PLUG-discuss@lists.phxlinux.org
>>>>> > To subscribe, unsubscribe, or to change your mail
>>>>> > settings:
>>>>> >
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>> >
>>>>> >
>>>>> >
>>>>> > ---------------------------------------------------
>>>>> > PLUG-discuss mailing list -
>>>>> > PLUG-discuss@lists.phxlinux.org
>>>>> > To subscribe, unsubscribe, or to change your mail
>>>>> > settings:
>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>> >
>>>>> >
>>>>> >
>>>>> > ---------------------------------------------------
>>>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>> >
>>>>> > ---------------------------------------------------
>>>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>> >
>>>>> >
>>>>> > ---------------------------------------------------
>>>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)