First I was wrong to say that /dev/sdd1 would not exist it you simply
unmounted it. I believe it can vary between a physical system and a VM.
-- returns the memory stick i just plugged in and assigns device /dev/sdb
$> dmesg
[ 452.300827] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0
PMAP PQ: 0 ANSI: 4
[ 452.302226] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 452.316528] sd 3:0:0:0: [sdb] 15240576 512-byte logical blocks: (7.80
GB/7.26
-- automount presents the stick to me because it has a file system
$> mount | grep sdb
/dev/sdb1 on /media/UNTITLED type vfat
-- fdisk returns the partition info
$> fdisk -l /dev/sdb
Device Boot Start End Blocks Id System
/dev/sdb1 2 15240575 7620287 b W95 FAT32
-- use fdisk to delete the partition
$> fdisk /dev/sdb
$> Command > d
$> Command > w
$> Command > p
Device Boot Start End Blocks Id System
-- use fdisk to create the partition
$> fdisk /dev/sdb
$> Command > o
$> Command > n
$> Command > 1 (press enter 3times)
$> Command > t
$> Command > b
$> Command > w
$> Command > p
Device Boot Start End Blocks Id System
/dev/sdb1 2048 15240575 7619264 b W95 FAT32
-- make the file system if needed, I say if needed because since the
partition is exactly the same and the fs is the same, automount mounted the
stick for me automagically
$> umount /dev/sdb1
$> mkfs.vfat /dev/sdb1
$> mount /dev/sdb /mnt/foobar
$> touch /mnt/foobar/test.txt
$> ls /mnt/fobar
test.txt
-- oops forgot the renaming of volume, I'm on debian so
$> apt-get install mtools
Setting up mtools (4.0.17-1) ...
$> mlabel -i /dev/sdb1 ::usb_stick
again... gparted is your friend
On Tue, May 6, 2014 at 9:42 AM, Mike Ballon <
mike.ballon@gmail.com> wrote:
> if you unmounted then /dev/sdd1 would no longer be there.
>
> Give me a few mins and I'll spin up a VM (I'm on a Mac) and I'll run
> through all the steps for you.
>
>
> On Tue, May 6, 2014 at 3:34 AM, Michael Havens <bmike1@gmail.com> wrote:
>
>> bummer.... new drive:
>>
>> mount
>> ...
>> /dev/sdd1 on /media/bmike1/OpenELEC type vfat
>> (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
>> <unmout device with file manager>
>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo mkfs -t vfat
>> /dev/sdd1
>> mkfs.vfat 3.0.13 (30 Jun 2012)
>> /dev/sdd1: No such file or directory
>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$
>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo mkfs -t vfat
>> /dev/sdd1
>> mkfs.vfat 3.0.13 (30 Jun 2012)
>> /dev/sdd1: No such file or directory
>> bmike1@PresarioLapTop1:/media/bmike1/OpenELEC$ sudo e2label /dev/sdd1
>> Pny2G
>> e2label: No such file or directory while trying to open /dev/sdd1
>> Couldn't find valid filesystem superblock.
>>
>> what am I doing wrong?
>>
>> :-)~MIKE~(-:
>>
>>
>> On Mon, May 5, 2014 at 8:28 PM, Michael Havens <bmike1@gmail.com> wrote:
>>
>>> that wouldn't change a vfat system but it inspired the correct search
>>> terms and I found 'dosfslabel'. Thanks for the help, man:D
>>>
>>> :-)~MIKE~(-:
>>>
>>>
>>> On Mon, May 5, 2014 at 7:50 PM, Ryan Rix <ry@n.rix.si> wrote:
>>>
>>>> Yeah, you're right Mike.
>>>>
>>>> https://help.ubuntu.com/community/RenameUSBDrive#FAT16_and_FAT32
>>>>
>>>> Michael Havens <bmike1@gmail.com> writes:
>>>> > same thing:
>>>> >
>>>> > sudo e2label /dev/sdd1 Goodwill
>>>> > e2label: Bad magic number in super-block while trying to open
>>>> > /dev/sdd1
>>>> > Couldn't find valid filesystem superblock.
>>>> >
>>>> > could it be because it is a vfat file system? (while I love linux I
>>>> > like to have the ability for my flash drives to be used on common
>>>> > computers)
>>>> >
>>>> > :-)~MIKE~(-:
>>>> >
>>>> > On Mon, May 5, 2014 at 5:51 PM, Mike Ballon <mike.ballon@gmail.com>
>>>> > wrote:
>>>> >
>>>> > It's I file system label so yes, you'll need to format. If there
>>>> > is no partition will have to create a partition before you can do
>>>> > a mkfs gparted should do all that for you
>>>> >
>>>> >
>>>> >
>>>> > On May 5, 2014 7:47 PM, "Michael Havens" <bmike1@gmail.com>
>>>> wrote:
>>>> >
>>>> >
>>>> > Thanks Mike. Does this error mean I need to format the drive?
>>>> >
>>>> >
>>>> >
>>>> > sudo e2label /dev/sdc1 Goodwill
>>>> > e2label: Bad magic number in super-block while trying to open
>>>> > /dev/sdc1
>>>> > Couldn't find valid filesystem superblock.
>>>> >
>>>> >
>>>> > This is what 'mount' shows sdc1 to be:
>>>> >
>>>> >
>>>> >
>>>> > /dev/sdc1 on /media/bmike1/OpenELEC type vfat
>>>> >
>>>> (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,
>>>> > showexec,flush,uhelper=udisks2)
>>>> >
>>>> >
>>>> > and to format this and apply the label it would be:
>>>> >
>>>> > mkfs -t vfat /dev/sdc1;e2label /dev/sdc1 Goodwill
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > :-)~MIKE~(-:
>>>> >
>>>> >
>>>> >
>>>> > On Mon, May 5, 2014 at 4:08 PM, Mike Ballon
>>>> > <mike.ballon@gmail.com> wrote:
>>>> >
>>>> >
>>>> > e2label
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > On Mon, May 5, 2014 at 7:05 PM, Michael Havens
>>>> > <bmike1@gmail.com> wrote:
>>>> >
>>>> >
>>>> >
>>>> > I have a few flash drives. When I plug them in to my
>>>> > computer a name referring to that flash drive appears
>>>> > in the file manager. I have two questions: the first
>>>> > is how do I change that name? The second is how do I
>>>> > set that name when I format the drive?
>>>> >
>>>> > :-)~MIKE~(-:
>>>> >
>>>> >
>>>> > ---------------------------------------------------
>>>> > PLUG-discuss mailing list -
>>>> > PLUG-discuss@lists.phxlinux.org
>>>> > To subscribe, unsubscribe, or to change your mail
>>>> > settings:
>>>> >
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>> >
>>>> >
>>>> >
>>>> > ---------------------------------------------------
>>>> > PLUG-discuss mailing list -
>>>> > PLUG-discuss@lists.phxlinux.org
>>>> > To subscribe, unsubscribe, or to change your mail
>>>> > settings:
>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>> >
>>>> >
>>>> >
>>>> > ---------------------------------------------------
>>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>> >
>>>> > ---------------------------------------------------
>>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>> >
>>>> >
>>>> > ---------------------------------------------------
>>>> > PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>> > To subscribe, unsubscribe, or to change your mail settings:
>>>> > http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)