So I need to run this on the MLB?
Mark
On Jul 1, 2012 1:36 PM, "James Mcphee" <
jmcphe@gmail.com> wrote:
> As such. You need to use whatever eth device you have, of course.
>
> jmcphee@locus ~ :) $ sudo ethtool eth2
> Settings for eth2:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Supported pause frame use: No
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Advertised pause frame use: Symmetric Receive-only
> Advertised auto-negotiation: Yes
> Link partner advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Link partner advertised pause frame use: Symmetric
> Link partner advertised auto-negotiation: Yes
> Speed: 100Mb/s
> Duplex: Full
> Port: MII
> PHYAD: 0
> Transceiver: internal
> Auto-negotiation: on
> Supports Wake-on: pumbg
> Wake-on: g
> Current message level: 0x00000033 (51)
> drv probe ifdown ifup
> Link detected: yes
>
>
> On Sun, Jul 1, 2012 at 1:22 PM, Mark Phillips <mark@phillipsmarketing.biz>wrote:
>
>> How do I use ethtool to answer your question?
>>
>> Mark
>>
>>
>> On Sun, Jul 1, 2012 at 12:52 PM, James Mcphee <jmcphe@gmail.com> wrote:
>>
>>> What does ethtool tell you about what the interface thinks it is?
>>>
>>> On Sun, Jul 1, 2012 at 12:44 PM, Mark Phillips <
>>> mark@phillipsmarketing.biz> wrote:
>>>
>>>> I have a 100baseT network with several Debian servers, a mac book, and
>>>> some virtual windows. I just picked up a Western Digital My Book Live (MBL)
>>>> 2TB NAS at Costco, and powered it up on my network. The unit is just
>>>> sitting with its green light on, and the web interface is really slow. When
>>>> I ping the device, it shows somewhere from 50% to 86% packet loss. If I
>>>> ping any other computer on the network I have 0% packet loss. I have tried
>>>> moving the device to different physical plugs, and I get the same results.
>>>>
>>>> ping results for the MBL from server A:
>>>> --- 192.168.25.213 ping statistics ---
>>>> 330 packets transmitted, 152 received, 53% packet loss, time 329555ms
>>>> rtt min/avg/max/mdev = 0.208/0.273/0.650/0.048 ms
>>>>
>>>> --- 192.168.25.213 ping statistics from server B ---
>>>> 254 packets transmitted, 120 received, 52% packet loss, time 252998ms
>>>> rtt min/avg/max/mdev = 0.196/0.264/2.499/0.206 ms
>>>>
>>>>
>>>> ping results for server A to B:
>>>> --- 192.168.25.130 ping statistics ---
>>>> 340 packets transmitted, 340 received, 0% packet loss, time 338996ms
>>>> rtt min/avg/max/mdev = 0.080/0.177/0.246/0.030 ms
>>>>
>>>> The device says gigabit Ethernet next to the Ethernet port. Is there
>>>> any reason I can't connect a gigabit Ethernet device to a 100baseT network
>>>> other than the obvious speed difference? Should I see all this packet loss?
>>>> This is actually the second unit I have tried - the first one acted the
>>>> same way, so I took it back. I am now wondering if I am doing something
>>>> wrong.
>>>>
>>>>
>>>> Thanks!
>>>>
>>>> Mark
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>>
>>> --
>>> James McPhee
>>> jmcphe@gmail.com
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>
>
>
>
> --
> James McPhee
> jmcphe@gmail.com
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)