So I need to run this on the MLB? Mark On Jul 1, 2012 1:36 PM, "James Mcphee" wrote: > As such. You need to use whatever eth device you have, of course. > > jmcphee@locus ~ :) $ sudo ethtool eth2 > Settings for eth2: > Supported ports: [ TP MII ] > Supported link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Supported pause frame use: No > Supports auto-negotiation: Yes > Advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > 1000baseT/Half 1000baseT/Full > Advertised pause frame use: Symmetric Receive-only > Advertised auto-negotiation: Yes > Link partner advertised link modes: 10baseT/Half 10baseT/Full > 100baseT/Half 100baseT/Full > Link partner advertised pause frame use: Symmetric > Link partner advertised auto-negotiation: Yes > Speed: 100Mb/s > Duplex: Full > Port: MII > PHYAD: 0 > Transceiver: internal > Auto-negotiation: on > Supports Wake-on: pumbg > Wake-on: g > Current message level: 0x00000033 (51) > drv probe ifdown ifup > Link detected: yes > > > On Sun, Jul 1, 2012 at 1:22 PM, Mark Phillips wrote: > >> How do I use ethtool to answer your question? >> >> Mark >> >> >> On Sun, Jul 1, 2012 at 12:52 PM, James Mcphee wrote: >> >>> What does ethtool tell you about what the interface thinks it is? >>> >>> On Sun, Jul 1, 2012 at 12:44 PM, Mark Phillips < >>> mark@phillipsmarketing.biz> wrote: >>> >>>> I have a 100baseT network with several Debian servers, a mac book, and >>>> some virtual windows. I just picked up a Western Digital My Book Live (MBL) >>>> 2TB NAS at Costco, and powered it up on my network. The unit is just >>>> sitting with its green light on, and the web interface is really slow. When >>>> I ping the device, it shows somewhere from 50% to 86% packet loss. If I >>>> ping any other computer on the network I have 0% packet loss. I have tried >>>> moving the device to different physical plugs, and I get the same results. >>>> >>>> ping results for the MBL from server A: >>>> --- 192.168.25.213 ping statistics --- >>>> 330 packets transmitted, 152 received, 53% packet loss, time 329555ms >>>> rtt min/avg/max/mdev = 0.208/0.273/0.650/0.048 ms >>>> >>>> --- 192.168.25.213 ping statistics from server B --- >>>> 254 packets transmitted, 120 received, 52% packet loss, time 252998ms >>>> rtt min/avg/max/mdev = 0.196/0.264/2.499/0.206 ms >>>> >>>> >>>> ping results for server A to B: >>>> --- 192.168.25.130 ping statistics --- >>>> 340 packets transmitted, 340 received, 0% packet loss, time 338996ms >>>> rtt min/avg/max/mdev = 0.080/0.177/0.246/0.030 ms >>>> >>>> The device says gigabit Ethernet next to the Ethernet port. Is there >>>> any reason I can't connect a gigabit Ethernet device to a 100baseT network >>>> other than the obvious speed difference? Should I see all this packet loss? >>>> This is actually the second unit I have tried - the first one acted the >>>> same way, so I took it back. I am now wondering if I am doing something >>>> wrong. >>>> >>>> >>>> Thanks! >>>> >>>> Mark >>>> >>>> --------------------------------------------------- >>>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >>>> To subscribe, unsubscribe, or to change your mail settings: >>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >>>> >>> >>> >>> >>> -- >>> James McPhee >>> jmcphe@gmail.com >>> >>> --------------------------------------------------- >>> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >>> To subscribe, unsubscribe, or to change your mail settings: >>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >>> >> >> >> --------------------------------------------------- >> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us >> To subscribe, unsubscribe, or to change your mail settings: >> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >> > > > > -- > James McPhee > jmcphe@gmail.com > > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change your mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss >