Re: configuring cisco catalyst 4500

You might also have to delete the vlan.dat file which stores the VLAN
information, if you don't want that information either.

plug@phxinternet.net wrote:
> If you get into enable mode (The #), type "erase startup-config", followed
> by reload. You do not want to save the current configuration if it asks.
>
> Gilbert
>
> -----Original Message-----
> From: plug-discuss-bounces@lists.plug.phoenix.az.us
> [mailto:plug-discuss-bounces@lists.plug.phoenix.az.us] On Behalf Of JT Moree
> Sent: Friday, December 29, 2006 12:11 PM
> To: Main PLUG discussion list
> Subject: Re: configuring cisco catalyst 4500
>
> > Some people have asked for more info on the cisco switch. Here it is.
>
> The password recovery isn't the problem. as far as we can tell we can
> get into the switch to do anything we need. The problem seems to be
> that we can't get it out of the current configuration even though we
> have tried to reset it to factory defaults with various commands and guides.
>
> No matter what we do the show run command still shows the old
> configuration. and as I said before the switch just wont let systems
> communicate (bc it's misconfigured.)
>
> Thank you
> >
>

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss