--- Vaughn Treude <
vltreude@deru.com> wrote:
> Hello everyone:
> Here's a hardware question for you. I have a
> machine running a 900 MHz
> Athlon. Its processor fan is making lots of noise
> and sounds like it's
> about to die. I tried to find a new Socket A-style
> heat sink at Fry's
> but they didn't have this ancient piece of hardware.
> On the good side,
> the dying fan on this heat since is a standard size
> (60 mm), and is
> fastened to the heat sink with screws. Is there any
> I shouldn't just
> replace the fan with a new one? The reason I ask is
> because the old fan
> has weird blades - smaller than on a standard fan,
> and more of them.
> The new fan, however, seems to blow much more air
> than the old one does
> (this was with its back to the floor, to simulate
> the restriction of the
> heat sink.) My theory is that the smaller blades may
> make the cooling
> more uniform, but I don't know if a 900 MHz
> processor is all that hot
> that I even have to worry about it.
> Vaughn
>
I like you, had a 'fan' available. BUT it didn't fit,
I just used a piece of angle and two bolts. My
processor is low in the case and that worked for mine.
It isn't touching the heat sink, but then a k62-350
machine doesn't produce as much heat, but it works to
keep it from slowing waaay down to about a 286's speed.
Remeber Katrina?
For several days, only amateur radio ops could get out,
and talk to others.
No Morse Code required for Technician class licensee
New hand helds start at about $85 and up for single band transcievers
at many dealers, just fyi.
Long live Knoppix, and Puppy Live Linux cd's.
Complete functional operating systems free if downloaded.
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)