Actually, Sempron is the next "desktop" chip from AMD. The Athlon/XP
line is ending, and the Sempron running in Socket/754 is it's
replacement. The primary split for AMD for new chip designs is Sempron
on Socket/754 for value systems and mainstream desktops and Athlon/64 on
Socket/939 for high-end desktops and professional workstations, the
current roadmap is at
(
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_608,00.html).
Note the almost complete absence of Socket/A designs from the roadmap
(Sempron on 130nm SOI is Socket/754, Sempron on 130nm is the only
Socket/A design in the roadmap).
There is no "Centron" processor that I've ever heard of, although Intel
has a "Celeron" for low-end value systems.
==Joseph++
P.S. Check out the new Turion line of mobile processors they announced
last month, it's pretty clear that AMD's pushing their 64-bit
architecture into every level of their product line going forward.
Ought to be interesting how Intel responds.
(
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_12651,00.html)
Craig White wrote:
>On Sun, 2005-04-03 at 21:11 -0700, Devin Rankin wrote:
>
>
>>I bought a Fry's special over the weekend. An ECS KT600-A with a Sempron
>>processor. But I'm having a problem I've never seen before and I was
>>wondering if anyone out there had seen it before.
>>
>>The issue is that the board itself will boot. I get a post and a memory
>>check. But the hard drive and the CD rom are not powering up.
>>
>>At first I thought this was a problem with the power supply, so I change it.
>>But I get the same problem with the second one. grant it, it is not a new
>>power supply. But I can't believe that I have two of them damaged in just
>>the same way.
>>
>>
>>
>----
>presuming that you mean Centron processor when you say Sempron...
>
>presuming when you say 'not a new' power supply...
>
>presuming that Centron processor motherboard has two connections from
>the power supply - the long multi-pin connector (probably has a
>designation but I don't know what it is) and a second 4 pin power
>connector. A power supply that is capable of supplying that second
>connection would likely be required - most of the ATX power supplies
>made in the last few years would have them but if you put the
>motherboard into an older case, it likely would not.
>
>Craig
>
>---------------------------------------------------
>PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
>To subscribe, unsubscribe, or to change you mail settings:
>http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
>
(text/plain)