Ray Hauge wrote:
> Hello everyone,
>
> I have been looking for some information on sub interfacing a network
> card. I know the card can handle it because there is already eth0:0,
> eth0:1, and eth0:2, I just haven't done this before.
>
> Thanks,
> Ray
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
Easy way: ifconfig eth0:5 123.34.56.78 netmask 255.255.255.0 up
(I chose :5 just because - it can be any number. I also choce a bogus
IP address.)
Unfortunately, if you want to make it survive a reboot, or a network
init script invocation, you need to add it to the distribution-specific
network configurations. Debian is different that RH/Mandrake.
Just in case you are using RH:
cd /etc/sysconfig/networl-scripts
cp ifcfg-eth0 ifcfg-eth0:5
vi ifcfg-eth0:5
Change it as shown:
DEVICE=eth0:5
BOOTPROTO=static
BROADCAST=123.34.56.255
IPADDR=123.34.56.78
NETMASK=255.255.255.0
NETWORK=123.34.56.0
ONBOOT=yes
TYPE=Ethernet
(replace the 123.34.56 stuff with your IP you are binding to the NIC.)
:wq
service network restart
you are done.
Cheers!
George Toft, CISSP, MSIS
AGD,LLC
www.agdllc.com
623-203-1760
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)