your best bet, toos it and get a new drive. a small IC on it is getting a
thermal runaway condition (I had the same problem and it because too much of
a bother to repir).
Technomage hawke
On Tuesday 10 August 2004 08:50 pm, Victor Odhner wrote:
> I was wondering if anyone can decode the error messages below?
>
> History: I have a TEAC CD-RW a few years old that has
> worked OK until this evening, under Linux. It stopped
> working under Win98 over a year ago -- Windows blue-screens
> any time you draw its attention to that drive.
>
> So tonight, it is failing under Xcdroast on Linux with the
> messages shown below. My question is simple, for anyone who
> knows what these diagnostics are talking about: does it look
> like the CD drive has finally gone around the bend? Or does
> it look more like I'm working with bad media? This shows one
> attempt (of three) on new Memorex CD-RW disks, and one
> attempt on a new TDK CD-R.
>
> Any pronouncements appreciated. At this point I'm supposing
> that I'm in for a trip to the store, but I'm not eager to
> spend more money. ...
>
> ... so, I'll also be happy to hear opinions on the best
> *cheap* deal on a CD writer. (I'm sure someone's going to
> tell me to buy a DVD. CDs really do meet my requirements,
> so it would take a compelling price to move me to a DVD
> burner.)
>
> Thanks,
>
> Vic
>
> ----------
>
> Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0"
> fs=6144k -v -useinfo speed=1 -dao -eject -pad -data "/root/bbc-2.1.iso"
> ...
>
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> pregap1: -1
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'TEAC '
> Identifikation : 'CD-W54E '
> Revision : '1.1B'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1493520 = 1458 KB
> FIFO size : 6291456 = 6144 KB
> Track 01: data 47 MB padsize: 30 KB
> Total size: 54 MB (05:25.74) = 24431 sectors
> Lout start: 55 MB (05:27/56) = 24431 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Reference speed: 2
> Is not unrestricted
> Is erasable
> ATIP start of lead in: -11615 (97:27/10)
> ATIP start of lead out: 335925 (74:41/00)
> speed low: 0 speed high: 4
> power mult factor: 4 5
> recommended erase/write power: 3
> A2 values: 00 00 00
> Disk type: Phase change
> Manuf. index: 18
> Manufacturer: Plasmon Data systems Ltd.
> Blocks total: 335925 Blocks current: 335925 Blocks remaining: 311494
> Starting to write CD/DVD at speed 1 in write mode for single session.
> ??????????0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ...
> input buffer ready.
> Performing OPC...
> Sending CUE sheet...
> cdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 00 01 B2 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.009s timeout 200s
>
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> write track data: error after 888832 bytes
> Writing time: 105.358s
> Fixating...
> Fixating time: 0.000s
>
> -----
>
> Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "0,0,0"
> fs=6144k -v -useinfo speed=1 -dao -eject -pad -data "/root/bbc-2.1.iso"
> ...
>
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> pregap1: -1
> Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
> TOC Type: 1 = CD-ROM
> Using libscg version 'schily-0.5'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'TEAC '
> Identifikation : 'CD-W54E '
> Revision : '1.1B'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1300480 = 1270 KB
> FIFO size : 6291456 = 6144 KB
> Track 01: data 47 MB padsize: 30 KB
> Total size: 54 MB (05:25.74) = 24431 sectors
> Lout start: 55 MB (05:27/56) = 24431 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type A, low Beta category (A-) (2)
> ATIP start of lead in: -11634 (97:26/66)
> ATIP start of lead out: 359849 (79:59/74)
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 3
> Manufacturer: CMC Magnetics Corporation
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 335418
> Starting to write CD/DVD at speed 1 in write mode for single session.
> ??????????0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Sending CUE sheet...
> cdrecord: WARNING: Drive returns wrong startsec (0) using -150
> Writing pregap for track 1 at -150
> Starting new track at sector: 0
> cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 00 01 D1 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
> ready) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 200s
>
> Sense Bytes: F0 00 03 00 00 00 10 0A 00 00 00 00 02 00 00 00 00 00
> write track data: error after 952320 bytes
> Writing time: 163.933s
> Fixating...
> cdrecord: Input/output error. flush cache: scsi sendcmd: no error
> CDB: 35 00 00 00 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 03 00 00 00 10 0A 00 00 00 00 02 00 00 00
> Sense Key: 0x3 Medium Error, Segment 0
> Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
> Sense flags: Blk 16 (valid)
> cmd finished after 7.520s timeout 200s
> Trouble flushing the cache
> Fixating time: 15.276s
>
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)