According to that 'ifconfig' statement, you are trying to telnet to
yourself. To connect to the switch, consider entering the switch's IP
address.
~Jay
On Wed, 7 Jul 2004, Michael Havens wrote:
>
>
> On a whim I decided that I wanted to play with this switches ipaddress. So I
> started telnet and the stupid program won't let me in now!
> What am I doing wrong?
>
> bmike1@0[bmike1]$ ifconfig eth0
> eth0 Link encap:Ethernet HWaddr 00:08:C7:CA:62:4B
> inet addr:10.10.10.2 Bcast:10.255.255.255 Mask:255.0.0.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:0 (0.0 b) TX bytes:7333 (7.1 KiB)
> Interrupt:9 Base address:0xd800 Memory:df100000-df100038
> bmike1@0[bmike1]$ sudo telnet
> telnet> open 10.10.10.2
> Trying 10.10.10.2...
> telnet: Unable to connect to remote host: Connection refused
> telnet> q
> bmike1@0[bmike1]$ ping 10.10.10.2
> PING 10.10.10.2 (10.10.10.2): 56 data bytes
> 64 bytes from 10.10.10.2: icmp_seq=0 ttl=64 time=0.2 ms
> 64 bytes from 10.10.10.2: icmp_seq=1 ttl=64 time=0.1 ms
> --- 10.10.10.2 ping statistics ---
> 2 packets transmitted, 2 packets received, 0% packet loss
> round-trip min/avg/max = 0.1/0.1/0.2 ms
> bmike1@0[bmike1]$ traceroute 10.10.10.2
> traceroute to 10.10.10.2 (10.10.10.2), 30 hops max, 38 byte packets
> 1 10.10.10.2 (10.10.10.2) 0.238 ms 0.191 ms 0.131 ms
> bmike1@0[bmike1]$
>
>
>
--
..
.. Jay Jacobson
.. Edgeos, Inc. - 480.961.5996 -
http://www.edgeos.com
..
.. Network Security Auditing and
.. Vulnerability Assessment Managed Services
..
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss