On Mon, 2004-06-21 at 16:39, Michael Havens wrote:
> On Friday 18 June 2004 09:09, Craig White wrote:
> > generally a com program needs to 'connect' or 'dial' (with a direct
> > connection, dialing is the same as connecting)
>
> And what do I dial too? Wait a second here! I am connecting to a serial port
> (ttyS?)(duhhhh! S=serial)(so that means my modem is considered a serial then)
> So how do you reinitialize the serial port? It must be 'Hangup' and then
> 'initialize Modem'. Do I have to shut the whole program down?
> So then, to be sure all of my ducks are in a row:
---[snip]---
Everything looks correct. The serial port you are connecting to is
probably /dev/ttyS0 or /dev/ttyS1. With all the settings as you have
described them, you should be able to connect your serial cable, then
power cycle the switch. Tap the [Enter] key a few times to send some
characters to the switch. This should be enough to establish the serial
connection. If you do not see the switch printing anything back to your
screen at this point, then you probably have a bad cable or a bad
switch.
...Kevin
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
(text/plain)