Sorry that was from another machine here is the correct cat /proc/scsi/sc=
si. =
cat /proc/scsi/scsi
Attached devices:
Host: scsi3 Channel: 00 Id: 06 Lun: 00
Vendor: DELL Model: 1x6 U2W SCSI BP Rev: 5.35
Type: Processor ANSI SCSI revision: 02
Host: scsi3 Channel: 01 Id: 06 Lun: 00
Vendor: QUANTUM Model: DLT7000 Rev: 2561
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi3 Channel: 02 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD0 RAID5 34556R Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 02
I believe it is on /dev/nst0 I do not have a tape in now and it reported =
no medium found. I am going to put a tape in and try it again.
mt -f /dev/nst0 status
mt: /dev/nst0: No medium found
Jim
> =
> From: "der.hans" <PLUGd@LuftHans.com>
> Date: 2003/07/31 Thu PM 03:41:13 EDT
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: Re: DLT and Debian
> =
> Am 31. Jul, 2003 schw=E4tzte elemint@cox.net so:
> =
> > Below is the output from cat /proc/scsi/scsi
> >
> > cat /proc/scsi/scsi
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0
> > Type: Direct-Access ANSI SCSI revision: 02
> =
> This should be a hard drive ( or drives since it appears to be RAID ).
> =
> > Host: scsi2 Channel: 00 Id: 03 Lun: 00
> > Vendor: HP Model: C1118M Rev: 5.14
> > Type: Medium Changer ANSI SCSI revision: 02
> =
> This is a robot.
> =
> > Host: scsi2 Channel: 00 Id: 04 Lun: 00
> > Vendor: HP Model: C1113M Rev: 1.14
> > Type: Optical Device ANSI SCSI revision: 02
> > Host: scsi2 Channel: 00 Id: 05 Lun: 00
> > Vendor: HP Model: C1113M Rev: 1.14
> > Type: Optical Device ANSI SCSI revision: 02
> =
> These should be mag-op drives, I think.
> =
> > Host: scsi3 Channel: 00 Id: 05 Lun: 00
> > Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.06
> > Type: CD-ROM ANSI SCSI revision: 02
> =
> And this one just might be a CD-ROM :).
> =
> > how can I confirm which device my DLT tape drive is?
> =
> What physical devices do you have hooked up to the box?
> =
> Is the medium changer a robot for the DLT? Do you have two DLT tape dri=
ves?
> =
> /dev/nst0 is the first tape drive, /dev/nst1 is the second tape drive.
> =
> mt -f /dev/nst0 status
> =
> ciao,
> =
> der.hans
> -- =
> # https://www.LuftHans.com/ http://www.AZOTO.org/
> # C'est la Net - der.hans
> =
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> =
(text/plain)