Sorry that was from another machine here is the correct cat /proc/scsi/sc= si. = cat /proc/scsi/scsi Attached devices: Host: scsi3 Channel: 00 Id: 06 Lun: 00 Vendor: DELL Model: 1x6 U2W SCSI BP Rev: 5.35 Type: Processor ANSI SCSI revision: 02 Host: scsi3 Channel: 01 Id: 06 Lun: 00 Vendor: QUANTUM Model: DLT7000 Rev: 2561 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi3 Channel: 02 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD0 RAID5 34556R Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 02 I believe it is on /dev/nst0 I do not have a tape in now and it reported = no medium found. I am going to put a tape in and try it again. mt -f /dev/nst0 status mt: /dev/nst0: No medium found Jim > = > From: "der.hans" > Date: 2003/07/31 Thu PM 03:41:13 EDT > To: plug-discuss@lists.plug.phoenix.az.us > Subject: Re: DLT and Debian > = > Am 31. Jul, 2003 schw=E4tzte elemint@cox.net so: > = > > Below is the output from cat /proc/scsi/scsi > > > > cat /proc/scsi/scsi > > Attached devices: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > > Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0 > > Type: Direct-Access ANSI SCSI revision: 02 > = > This should be a hard drive ( or drives since it appears to be RAID ). > = > > Host: scsi2 Channel: 00 Id: 03 Lun: 00 > > Vendor: HP Model: C1118M Rev: 5.14 > > Type: Medium Changer ANSI SCSI revision: 02 > = > This is a robot. > = > > Host: scsi2 Channel: 00 Id: 04 Lun: 00 > > Vendor: HP Model: C1113M Rev: 1.14 > > Type: Optical Device ANSI SCSI revision: 02 > > Host: scsi2 Channel: 00 Id: 05 Lun: 00 > > Vendor: HP Model: C1113M Rev: 1.14 > > Type: Optical Device ANSI SCSI revision: 02 > = > These should be mag-op drives, I think. > = > > Host: scsi3 Channel: 00 Id: 05 Lun: 00 > > Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.06 > > Type: CD-ROM ANSI SCSI revision: 02 > = > And this one just might be a CD-ROM :). > = > > how can I confirm which device my DLT tape drive is? > = > What physical devices do you have hooked up to the box? > = > Is the medium changer a robot for the DLT? Do you have two DLT tape dri= ves? > = > /dev/nst0 is the first tape drive, /dev/nst1 is the second tape drive. > = > mt -f /dev/nst0 status > = > ciao, > = > der.hans > -- = > # https://www.LuftHans.com/ http://www.AZOTO.org/ > # C'est la Net - der.hans > = > --------------------------------------------------- > PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us > To subscribe, unsubscribe, or to change you mail settings: > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss > =