Below is the output from cat /proc/scsi/scsi
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: DELL Model: PERCRAID RAID5 Rev: V1.0
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 03 Lun: 00
Vendor: HP Model: C1118M Rev: 5.14
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 04 Lun: 00
Vendor: HP Model: C1113M Rev: 1.14
Type: Optical Device ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 05 Lun: 00
Vendor: HP Model: C1113M Rev: 1.14
Type: Optical Device ANSI SCSI revision: 02
Host: scsi3 Channel: 00 Id: 05 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
how can I confirm which device my DLT tape drive is? =
Jim
> =
> From: "der.hans" <PLUGd@LuftHans.com>
> Date: 2003/06/17 Tue PM 06:46:05 EDT
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: Re: DLT and Debian
> =
> Am 17. Jun, 2003 schw=E4tzte elemint@cox.net so:
> =
> > If a DLT drive is added to a Deian server does DLT or tape support ha=
ve to
> > built into the kernel which would require a recompile or is the suppo=
rt
> > already native in Debian for a DLT tape drive?
> =
> The st module is pre-built for kernel packages from debian.
> =
> modprobe st
> =
> cat /proc/scsi/scsi to see if the tape drive is recognized.
> =
> /dev/nst0 is the non-rewind device, /dev/st0 is the rewind device. Alwa=
ys
> use the non-rewind device unless you explicitly need the rewind device.=
> =
> mt is used to manipulate the tape drive. mtx is for libraries.
> =
> ciao,
> =
> der.hans
> -- =
> # https://www.LuftHans.com/ http://www.AZOTO.org/
> # Nobody grows old merely by living a number of years.
> # We grow old by deserting our ideals.
> # Years may wrinkle the skin, but to give up enthusiasm
> # wrinkles the soul. -- Samuel Ullman
> =
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change you mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> =
(text/plain)