DSL Modem Question

Seems like my best long term solution will be to find a way to upgrade one of
the lines (maybe by switching ISPs) and then once that line is redone,
discontinue use on the line that is currently run by the 675. I could try for a
678 on ebay, but would rather not bother since the devices are EOL anyway. Only
problem will be convincing my parents who are the ones actually paying for the
lines as a change of ISP would mean a change of email addresses.

> The Netgear and the Cisco 678 only support VPN pass through. If you want an
> endpoint that supports VPN termination, we always suggest Netopia. Netopia
> has the 4541. It will terminate VPNs and work on ADSL. Unfortunatly, the
> Netgear and the Netopia only support G.Lite (G.992.2), G.DMT (G.992.1) and
> T1.413 (ANSI ADSL DMT issue 2). The Cisco 678 is the only box I have found
> that supports both DMT and CAP. The Cisco 678 if set up as routed will also
> forward VPN traffic to an internal address. I have forwarded both IPSec and
> PPTP tunnels through Cisco 678s.
>
> Gilbert
>
> -----Original Message-----
> From: plug-discuss-admin@lists.plug.phoenix.az.us
> [mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of Kevin
> Brown
> Sent: Monday, April 28, 2003 7:06 PM
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: Re: DSL Modem Question
>
>
> Unfortunately I only have the 675 (hence why it doesn't work on the second
> DSL
> line) and the internal 2200 card. I want to get rid of the PCI card, but
> would
> also like a replacement for the 675 since it doesn't support IP Sec and I
> really
> don't want to load work applications on my personal machines (Office XP,
> Cisco
> VPN, Outlook, etc...). I'd rather keep those on my work machine, but
> without
> VPN I can't really telecommute and fix things remotely.
>
>
>>A Cisco 678 will support both fine. I looked at the Technical Specs for
>
> the
>
>>Netgear and did not see CAP listed as being supported
>>(http://www.netgear.com/products/details/DG814.asp?view=).
>>
>>Gilbert
>>
>>-----Original Message-----
>>From: plug-discuss-admin@lists.plug.phoenix.az.us
>>[mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of Kevin
>>Brown
>>Sent: Monday, April 28, 2003 12:21 AM
>>To: plug-discuss@lists.plug.phoenix.az.us
>>Subject: DSL Modem Question
>>
>>
>>I saw in another thread that a Netgear DG814 DSL modem can be used with
>>Qwest
>>DSL in place of a Cisco 678 or the internal PCI Intel 2200 card. My
>>question
>>is, I have two DSL feeds coming into my house (don't ask). Currently one
>>connects to an EOL Cisco 675 DSL Router and the other goes straight into a
>>Windows box (Internal PCI Modem). I've tried using the 675 in place of
>
> the
>
>>Internal card, but apparently in the time between getting the first line
>
> and
>
>>then the second (about 1.5 years) they changed protocols and so the 675
>>doesn't
>>work on the newer line (even with the most recent CBOS). Would the
>>afformentioned Netgear DSL modem work for both protocols? I don't need it
>>to
>>support both lines at once, just want one piece of hardware that will work
>>for
>>either line as needed. This would let me convert the machine with the
>
> Intel
>
>>card to Linux and still be able to use both lines from my network (hmm,
>>Linux
>>router doing load balancing???).