DSL Modem Question

The Netgear and the Cisco 678 only support VPN pass through. If you want an
endpoint that supports VPN termination, we always suggest Netopia. Netopia
has the 4541. It will terminate VPNs and work on ADSL. Unfortunatly, the
Netgear and the Netopia only support G.Lite (G.992.2), G.DMT (G.992.1) and
T1.413 (ANSI ADSL DMT issue 2). The Cisco 678 is the only box I have found
that supports both DMT and CAP. The Cisco 678 if set up as routed will also
forward VPN traffic to an internal address. I have forwarded both IPSec and
PPTP tunnels through Cisco 678s.

Gilbert

-----Original Message-----
From: plug-discuss-admin@lists.plug.phoenix.az.us
[mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of Kevin
Brown
Sent: Monday, April 28, 2003 7:06 PM
To: plug-discuss@lists.plug.phoenix.az.us
Subject: Re: DSL Modem Question


Unfortunately I only have the 675 (hence why it doesn't work on the second
DSL
line) and the internal 2200 card. I want to get rid of the PCI card, but
would
also like a replacement for the 675 since it doesn't support IP Sec and I
really
don't want to load work applications on my personal machines (Office XP,
Cisco
VPN, Outlook, etc...). I'd rather keep those on my work machine, but
without
VPN I can't really telecommute and fix things remotely.

> A Cisco 678 will support both fine. I looked at the Technical Specs for
the
> Netgear and did not see CAP listed as being supported
> (http://www.netgear.com/products/details/DG814.asp?view=).
>
> Gilbert
>
> -----Original Message-----
> From: plug-discuss-admin@lists.plug.phoenix.az.us
> [mailto:plug-discuss-admin@lists.plug.phoenix.az.us]On Behalf Of Kevin
> Brown
> Sent: Monday, April 28, 2003 12:21 AM
> To: plug-discuss@lists.plug.phoenix.az.us
> Subject: DSL Modem Question
>
>
> I saw in another thread that a Netgear DG814 DSL modem can be used with
> Qwest
> DSL in place of a Cisco 678 or the internal PCI Intel 2200 card. My
> question
> is, I have two DSL feeds coming into my house (don't ask). Currently one
> connects to an EOL Cisco 675 DSL Router and the other goes straight into a
> Windows box (Internal PCI Modem). I've tried using the 675 in place of
the
> Internal card, but apparently in the time between getting the first line
and
> then the second (about 1.5 years) they changed protocols and so the 675
> doesn't
> work on the newer line (even with the most recent CBOS). Would the
> afformentioned Netgear DSL modem work for both protocols? I don't need it
> to
> support both lines at once, just want one piece of hardware that will work
> for
> either line as needed. This would let me convert the machine with the
Intel
> card to Linux and still be able to use both lines from my network (hmm,
> Linux
> router doing load balancing???).

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change you mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss