lilo

Frustrated - can't seem to make this thing workee...

setup... IDE hard drive is set in bios to be the boot drive - also have 2 SCSI
controllers (won't boot linux - AHA 131) but will boot from floppy disk. All I
get is "Unable to load OS" (unless I insert floppy and hit a key)

*****
lilo is:
map=/boot/map
install=/boot/boot.b
prompt
timeout=50
message=/boot/message
#linear
default=linux
disk=/dev/hda
lba32
#    bios=0x80

image=/boot/vmlinuz-2.4.2-2
    label=linux
    initrd=/boot/initrd-2.4.2-2.img
    read-only
    root=/dev/md2

*****
/boot looks good (/dev/hda1)
> ls -l /boot

total 7230
lrwxrwxrwx    1 root     root           18 Mar 11 23:44 System.map -> 
System.map-2.4.2-2
-rw-r--r--    1 root     root       410990 Mar 11 22:34 System.map-2.4.2-2
-rw-r--r--    1 root     root       426402 Mar 11 22:34 System.map-2.4.3-12
-rw-r--r--    1 root     root          512 Mar 11 22:42 boot.0300
-rw-r--r--    1 root     root          512 Mar 11 22:34 boot.0800
-rw-r--r--    1 root     root          512 Mar 11 22:34 boot.0801
-rw-r--r--    1 root     root          512 Mar 11 22:59 boot.0902
-rw-r--r--    1 root     root         5824 Mar 11 22:34 boot.b
-rw-r--r--    1 root     root          612 Mar 11 22:34 chain.b
-rw-r--r--    1 root     root       377876 Mar 11 22:34 initrd-2.4.2-2.img
lrwxrwxrwx    1 root     root           14 Mar 11 22:34 kernel.h -> kernel.h-
2.4.2
-rw-r--r--    1 root     root          405 Mar 11 22:34 kernel.h-2.4.2
drwxr-xr-x    2 root     root        12288 Mar 11 22:33 lost+found
-rw-------    1 root     root        16384 Mar 11 23:27 map
-rw-------    1 root     root        16384 Mar 11 22:34 map.0801
-rw-r--r--    1 root     root        23108 Mar 11 22:34 message
lrwxrwxrwx    1 root     root           20 Mar 11 22:34 module-info -> module-
info-2.4.3-12
-rw-r--r--    1 root     root        13598 Mar 11 22:34 module-info-2.4.2-2
-rw-r--r--    1 root     root        13598 Mar 11 22:34 module-info-2.4.3-12
-rw-r--r--    1 root     root          640 Mar 11 22:34 os2_d.b
-rwxr-xr-x    1 root     root      2280836 Mar 11 22:34 vmlinux-2.4.2-2
-rwxr-xr-x    1 root     root      2174722 Mar 11 22:34 vmlinux-2.4.3-12
lrwxrwxrwx    1 root     root           16 Mar 11 22:34 vmlinuz -> vmlinuz-
2.4.3-12
-rw-r--r--    1 root     root       781806 Mar 11 22:34 vmlinuz-2.4.2-2
-rw-r--r--    1 root     root       792853 Mar 11 22:34 vmlinuz-2.4.3-12

*****
dmesg (relevant area)

    ide0: BM-DMA at 0xfc90-0xfc97, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xfc98-0xfc9f, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 91360U4, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 26588016 sectors (13613 MB) w/2048KiB Cache, CHS=46825/247/38, UDMA(33)
Partition check:
 hda: [PTBL] [1655/255/63] hda1 hda2

Anyone care to give me a hint on what I have to do to lilo to make it work?

Craig



-------------------------------------------------
This mail sent through IMP: barney.azapple.com