Routing Table Problems

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: DavidDemlandddemland@cadtel.com
Date:  
Subject: Routing Table Problems
I am still having a problem with the routing table on this Storm box. The
following is the /etc/network/interfaces file:

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
iface lo inet loopback

iface eth0 inet static
    address 192.168.1.204
    netmask 255.255.255.0
    gateway 63.88.193.129


iface eth1 inet static
    address 63.88.193.147
    netmask 255.255.255.240
    gateway 63.88.193.129
    broadcast 63.88.193.255


The ifconfig command output is:

eth0      Link encap:Ethernet  HWaddr 00:D0:B7:BF:AA:60
          inet addr:192.168.1.204  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5555 errors:0 dropped:0 overruns:0 frame:0
          TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          Interrupt:10


eth1      Link encap:Ethernet  HWaddr 00:D0:B7:BF:A6:C4
          inet addr:63.88.193.147  Bcast:63.255.255.255
Mask:255.255.255.240
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:240 errors:0 dropped:0 overruns:0 frame:0
          TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          Interrupt:9 Base address:0x2000


lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0


The route -n command output is:

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
63.88.193.144   0.0.0.0         255.255.255.240 U     0      0        0 eth1
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0


My question, in the interfaces file the IP for eth1 is 63.88.193.147. The
ifconfig command seems to reinforce this with the IP address of the same.
But the route command has an IP of 63.88.193.144. Where in the world does
this come from?

Can anyone help?

Thank You,

David Demland
Qa/Testing Manager
CADTEL Systems, Inc.
11201 N. Tatum Ste. 200
Phoenix, AZ 85028
(602) 953-4888
Fax: (602) 953-4833