I am still having a problem with the routing table on this Storm box. The
following is the /etc/network/interfaces file:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
iface lo inet loopback
iface eth0 inet static
address 192.168.1.204
netmask 255.255.255.0
gateway 63.88.193.129
iface eth1 inet static
address 63.88.193.147
netmask 255.255.255.240
gateway 63.88.193.129
broadcast 63.88.193.255
The ifconfig command output is:
eth0 Link encap:Ethernet HWaddr 00:D0:B7:BF:AA:60
inet addr:192.168.1.204 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5555 errors:0 dropped:0 overruns:0 frame:0
TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:10
eth1 Link encap:Ethernet HWaddr 00:D0:B7:BF:A6:C4
inet addr:63.88.193.147 Bcast:63.255.255.255
Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:240 errors:0 dropped:0 overruns:0 frame:0
TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:9 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
The route -n command output is:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
63.88.193.144 0.0.0.0 255.255.255.240 U 0 0 0 eth1
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
My question, in the interfaces file the IP for eth1 is 63.88.193.147. The
ifconfig command seems to reinforce this with the IP address of the same.
But the route command has an IP of 63.88.193.144. Where in the world does
this come from?
Can anyone help?
Thank You,
David Demland
Qa/Testing Manager
CADTEL Systems, Inc.
11201 N. Tatum Ste. 200
Phoenix, AZ 85028
(602) 953-4888
Fax: (602) 953-4833
ddemland@cadtel.com