Routing Table Problems

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: MikeStarkemstarke@mobl.com
Date:  
Subject: Routing Table Problems
Check to make sure you have the correct broadcast
for eth1 (maybe 63.88.193.15 ?)


On Mon, Sep 25, 2000 at 10:32:32AM -0700, David Demland wrote:
I am still having a problem with the routing table on this Storm box. The
following is the /etc/network/interfaces file:

# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)

# The loopback interface
iface lo inet loopback

 iface eth0 inet static
     address 192.168.1.204
     netmask 255.255.255.0
     gateway 63.88.193.129


 iface eth1 inet static
     address 63.88.193.147
     netmask 255.255.255.240
     gateway 63.88.193.129
     broadcast 63.88.193.255


The ifconfig command output is:

 eth0      Link encap:Ethernet  HWaddr 00:D0:B7:BF:AA:60
           inet addr:192.168.1.204  Bcast:192.168.1.255  Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:5555 errors:0 dropped:0 overruns:0 frame:0
           TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:100
           Interrupt:10


 eth1      Link encap:Ethernet  HWaddr 00:D0:B7:BF:A6:C4
           inet addr:63.88.193.147  Bcast:63.255.255.255
 Mask:255.255.255.240
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:240 errors:0 dropped:0 overruns:0 frame:0
           TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:100
           Interrupt:9 Base address:0x2000


 lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING  MTU:3924  Metric:1
           RX packets:14 errors:0 dropped:0 overruns:0 frame:0
           TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0


The route -n command output is:

 Kernel IP routing table
 Destination     Gateway         Genmask         Flags Metric Ref    Use
 Iface
 63.88.193.144   0.0.0.0         255.255.255.240 U     0      0        0 eth1
 192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0


My question, in the interfaces file the IP for eth1 is 63.88.193.147. The
ifconfig command seems to reinforce this with the IP address of the same.
But the route command has an IP of 63.88.193.144. Where in the world does
this come from?

Can anyone help?

Thank You,

David Demland
Qa/Testing Manager
CADTEL Systems, Inc.
11201 N. Tatum Ste. 200
Phoenix, AZ 85028
(602) 953-4888
Fax: (602) 953-4833



________________________________________________
See http://PLUG.phoenix.az.us/navigator-mail.shtml if your mail doesn't post to the list quickly and you use Netscape to write mail.

Plug-discuss mailing list -
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

--
V/R
Mike Starke

public key "http://www.neta.com/~mgcon/downloads/mstarke_public.txt"

chgrp -R USMC /home/*