POP3 server

When I compiled qpopper, I did a straight ./configure I did not add any
special tags or commands for anything else.
When I telnet into port 110, and type
user mmyers
It says that a password is needed for mmyers
when I type
pass garble (ficticious)
It tells me that the password is incorrect, even though "garble" is my
password on the system.
Does anyone have any ideas?
Mark

----- Original Message -----
From: "Mark R. Myers" <myers@fastq.com>
To: "Mark Peoples" <hondaman@mainex1.asu.edu>; <dcadmin@inficad.com>;
<plug-discuss@lists.PLUG.phoenix.az.us>
Sent: Thursday, May 11, 2000 9:51 PM
Subject: Re: POP3 server


> I did find out what part of the problem was.
> Part of the problem was that in /etc/services it referred to pop3
> In inetd.conf, it referred to pop-3.
> Once I changed inetd.conf to pop3, Qpopper then came up.
> But then it would not let me log in.
> If you are interested, here is the problem that I ran into after Qpopper
came
> up.
>
> http://www.pamarq.com/qpoperror.htm
>
> Yes Mark, do have DSL through fastq (Actually, the DSL is supplied by
USWest and
> the ISP is Fastq).
> I love my service and would recommend it to anyone.
> I pay $19.95/month + $9.95/month for 8 static IP addresses.
> I can run whatever server I want on my machines, and they even helped me
get my
> domain (pamarq.com) registered with the DNS services.
> Everyone I've talked to there is very knowledgable there (try to get that
from
> Tier 1 at USWest) and very kind.
> I am glad I switched.
> I switched from Cox@Home to DSL, and have never regretted it.
> I even got rid of Cox cable and now have the Dish Network (satallite) and
could
> not be happier.
> Mark
>
>
> Mark Peoples wrote:
>
> > You mean inetd.conf, not init.conf right? If so, /etc/rc.d/init.d/inetd
> > restart will suffice.
> >
> > Did you make sure that you placed the executable (popper) in the same
place
> > that inetd.conf references? Is the executable bit set on the executable?
> > Does /var/log/messages say anything odd about popper? Run this script
for
> > me, if you don't mind...
> >
> > #!/bin/csh
> > cat /var/log/messages* | grep popper > /tmp/popperlog
> > mail -s "QPopper Logs from Mark Myers - myers@fastq.com"
dcadmin@inficad.com
> > < /tmp/popperlog
> > rm /tmp/popperlog
> >
> > Also, how is fastq? Do you have DSL from them? If so, I've got some ?s
for
> > ya. =)
> >
> > Thanks and take care,
> > Mark
> >
> > PS - I'll be going home in about 30 seconds, so send replies to
> > dcadmin@inficad.com...I only get PLUG at work, not home. hehe
> >
> > -----Original Message-----
> > From: Mark R. Myers [mailto:myers@fastq.com]
> > Sent: Thursday, May 11, 2000 5:02 PM
> > To: plug-discuss@lists.PLUG.phoenix.az.us
> > Subject: Re: POP3 server
> >
> > I'm not quite sure.
> > I read all of the docs for Qpopper 3.?? and it compiled & installed on
> > RedHat
> > 6.2 without a hitch.
> > I made the necessary changes to /etc/services and init.conf
> > Just to be sure, I rebooted the computer.
> > POP3 server was not working.
> > I could not telnet into port 110.
> > After changing init.conf, do I have to run init as in when one makes
changes
> > to
> > lilo.conf, one has to run lilo again?
> > Maybe my ignorance got the best of me.
> > I tried Mercury32 for Win32, but I think they should stick to Netware.
After
> > about a day, I would develop memory errors (128MB RAM) and have to
reboot.
> > The memory errors were not affect NT Server, just Mercury32.
> > The DMail program is nice, but it does limit one to 5 mailboxes and I'm
not
> > crazy about running an NT Server.
> > I do that at work. I have no choice.
> > At home, I want a choice.
> > Mark
> >
> > Mark Peoples wrote:
> >
> > > What problems where you having with Qpopper? It's always been a
c/m/mi
> > > process for me...
> > >
> > > -----Original Message-----
> > > From: Mark R. Myers [mailto:myers@fastq.com]
> > > Sent: Thursday, May 11, 2000 3:43 PM
> > > To: plug-discuss@lists.PLUG.phoenix.az.us
> > > Subject: POP3 server
> > >
> > > Is there a simple POP3 server out there for Linux?
> > > I tried Qpopper and was not able to get it to work.
> > > I have my own domain and would like to run e-mail services on it.
> > > Using sendmail I can even get it to relay from my local subnet and my
> > > firewall computer at work, but I can't seem to get POP setup
correctly.
> > > I finally got exasperated and put NT Server back on and installed
DMail
> > > which is a $495 program, but for 5 users or less, they give a free
> > license.
> > > Any ideas?
> > > Are there any graphical POP configuration utilities out there?
> > > I'm not adverse to editing from the console (I prefer pico), but I
want it
> > > to work when I'm done.
> > > Any help would be appreciated.
> > > Mark
> > >
> > >
> > >
> > > _______________________________________________
> > > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> > >
> > > _______________________________________________
> > > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
> >
> > _______________________________________________
> > Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> > http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
>
> _______________________________________________
> Plug-discuss mailing list - Plug-discuss@lists.PLUG.phoenix.az.us
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>