computer slow
Michael
bmike1 at gmail.com
Mon Oct 30 17:33:41 MST 2017
I'm just about to take a reading and then run stress again. It is pretty
coo, in here so not sure if a fan would do any good.
$ sensors
radeon-pci-0100
Adapter: PCI adapter
temp1: +74.5°C
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +51.6°C (high = +70.0°C)
(crit = +72.0°C, hyst = +70.0°C)
want me to crash it now?
On Mon, Oct 30, 2017 at 8:30 PM, Brien Dieterle <briend at gmail.com> wrote:
> Well, those temperatures are not that hot, but that doesn't mean some
> cooling wouldn't improve things.
> Have you popped the case off and pointed a big fan in there and tried to
> reproduce the crash yet?
>
> On Mon, Oct 30, 2017 at 5:21 PM, Michael <bmike1 at gmail.com> wrote:
>
>> Here is around 180 seconds of readings at around 10 second intervals (if
>> it helps):
>>
>> $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +74.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.5°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.0°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.0°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.4°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.2°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.0°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.5°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +50.9°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +53.6°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +52.4°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.8°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +74.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.1°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +74.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.0°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +74.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +52.0°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +74.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +50.6°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +74.5°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.4°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.8°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>> bmike1 at MikesBeast ~ $ sensors
>> radeon-pci-0100
>> Adapter: PCI adapter
>> temp1: +75.0°C
>>
>> k10temp-pci-00c3
>> Adapter: PCI adapter
>> temp1: +51.9°C (high = +70.0°C)
>> (crit = +72.0°C, hyst = +70.0°C)
>>
>>
>> On Mon, Oct 30, 2017 at 7:39 PM, Brien Dieterle <briend at gmail.com> wrote:
>>
>>> 30 mins is plenty for a test. Try to get sensors output just before a
>>> crash
>>>
>>> On Mon, Oct 30, 2017 at 4:25 PM, Michael <bmike1 at gmail.com> wrote:
>>>
>>>> how long do you want me to run glmark2 for? Forever is not feasible!
>>>>
>>>> On Mon, Oct 30, 2017 at 7:22 PM, Michael <bmike1 at gmail.com> wrote:
>>>>
>>>>> as for the shutoff point everything that had anything to do with
>>>>> cutting power was already diabled
>>>>>
>>>>> On Mon, Oct 30, 2017 at 7:20 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>
>>>>>> $ sensors
>>>>>> radeon-pci-0100
>>>>>> Adapter: PCI adapter
>>>>>> temp1: +68.0°C
>>>>>>
>>>>>> k10temp-pci-00c3
>>>>>> Adapter: PCI adapter
>>>>>> temp1: +45.1°C (high = +70.0°C)
>>>>>> (crit = +72.0°C, hyst = +70.0°C)
>>>>>>
>>>>>>
>>>>>> On Mon, Oct 30, 2017 at 7:07 PM, Brien Dieterle <briend at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Well, it might be protecting your computer but if it is too low it
>>>>>>> will just be annoying.
>>>>>>> You still need to run sensors and get those numbers if you haven't
>>>>>>> yet:
>>>>>>>
>>>>>>> https://askubuntu.com/questions/15832/how-do-i-get-the-cpu-t
>>>>>>> emperature
>>>>>>>
>>>>>>> If your machine is legitimately overheating you need to address that
>>>>>>> with fans and ventilation, etc.
>>>>>>>
>>>>>>> On Mon, Oct 30, 2017 at 3:59 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>>>
>>>>>>>> if there is a shutoff point you did say disable it?
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, Oct 30, 2017 at 6:56 PM, Brien Dieterle <briend at gmail.com>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Well, you're on the right track. Try to isolate whether glmark
>>>>>>>>> alone can crash it, or if you need stress as well. Then try opening up
>>>>>>>>> your case and point a fan in there.
>>>>>>>>> Also don't forget to check the BIOS for thermal management events
>>>>>>>>> that might be causing the shutdown/reboot.
>>>>>>>>>
>>>>>>>>> On Mon, Oct 30, 2017 at 3:52 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> never mind..... I ran glmark around 5 minutes and then stress.
>>>>>>>>>> that crashed the machine! Not a nice reboot (like what it does with dt) but
>>>>>>>>>> a power failure outage,
>>>>>>>>>>
>>>>>>>>>> On Mon, Oct 30, 2017 at 6:41 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> and if glmark2 doesn't crash it run stress the same amount of
>>>>>>>>>>> time?
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:37 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> how long do I let glmark2's pretty horse rotate?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:36 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> okay
>>>>>>>>>>>>> `
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:10 PM, Brien Dieterle <
>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'd wait. If stress alone doesn't crash, run glmark2 by
>>>>>>>>>>>>>> itself. If glmark2 doesn't crash, run them both at the same time.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:01 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> run this now or after stress completes?
>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:59 PM, Brien Dieterle <
>>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Well, not yet ;-). If it doesn't crash, you might need to
>>>>>>>>>>>>>>>> stress the graphics card as well with one of these tools:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> https://www.pcsuggest.com/gpu-
>>>>>>>>>>>>>>>> benchmarking-and-stress-testing-in-linux/
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> So maybe kick off both stress and
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> glmark2 --run-forever
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:55 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> if it doesn't crash I'll start hounding the darktable
>>>>>>>>>>>>>>>>> forums.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:45 PM, Michael <bmike1 at gmail.com
>>>>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Just started..... lets see what happens
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:36 PM, Brien Dieterle <
>>>>>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Forget darktable for now. Did you run stress test for
>>>>>>>>>>>>>>>>>>> more than 10 seconds?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> This will run a stress test for 30 minutes:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> stress --cpu 8 --io 4 --vm 2 --hdd 2 --timeout 1800s
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> If you can get it to crash with just this stress
>>>>>>>>>>>>>>>>>>> program, then it has nothing to do with darktable
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:24 PM, Michael <
>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I have no sensors running and as for it panicing when
>>>>>>>>>>>>>>>>>>>> warm sometimes it panics after I run dt 2 minutes after it had been shut
>>>>>>>>>>>>>>>>>>>> down an hour and doesn't panic even though dt had run10 minutes.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 4:31 PM, Brien Dieterle <
>>>>>>>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Check your bios settings for hardware monitoring and
>>>>>>>>>>>>>>>>>>>>> temperature limits. You may have it set with a maximum temperature so the
>>>>>>>>>>>>>>>>>>>>> machine panics when it's just warm.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Try raising this number or disabling the feature
>>>>>>>>>>>>>>>>>>>>> entirely
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> But first check your sensors by installing a
>>>>>>>>>>>>>>>>>>>>> temperature monitoring program
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Oct 30, 2017 1:04 PM, "Michael" <bmike1 at gmail.com>
>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> it is sooo ify! I just ran it for like 10 minutes
>>>>>>>>>>>>>>>>>>>>>> with no crashes whereas before I had just started the computer and ran dt
>>>>>>>>>>>>>>>>>>>>>> for 2 minutes and it crashed. Then I restarted and I had a repeat
>>>>>>>>>>>>>>>>>>>>>> performance of the 2 minute thing.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:38 PM, Michael <
>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> $ stress --cpu 8 --io 4 --vm 2 --vm-bytes 128M
>>>>>>>>>>>>>>>>>>>>>>> --timeout 10s
>>>>>>>>>>>>>>>>>>>>>>> stress: info: [7571] dispatching hogs: 8 cpu, 4 io,
>>>>>>>>>>>>>>>>>>>>>>> 2 vm, 0 hdd
>>>>>>>>>>>>>>>>>>>>>>> stress: info: [7571] successful run completed in 10s
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> I don't know what that was suppossed to tell me but
>>>>>>>>>>>>>>>>>>>>>>> there it is.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:36 PM, Michael <
>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I am experiencing no slowness. It is like the days
>>>>>>>>>>>>>>>>>>>>>>>> where you had a power switch on the back of your computer... or it is like
>>>>>>>>>>>>>>>>>>>>>>>> a hard reboot.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:33 PM, Stephen Partington
>>>>>>>>>>>>>>>>>>>>>>>> <cryptworks at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> OpenCL in darktable mainly impacts rendering. it
>>>>>>>>>>>>>>>>>>>>>>>>> should have no effect on on system or ram consumption unless you are
>>>>>>>>>>>>>>>>>>>>>>>>> experiencing slowness during render cycles.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:21 PM, Michael <
>>>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> You know.... I'm having trouble running
>>>>>>>>>>>>>>>>>>>>>>>>>> darktable. It seems that after I start it it runs a few minutes and then
>>>>>>>>>>>>>>>>>>>>>>>>>> reboots the computer. Probably because I do not have a GPU (I don't think).
>>>>>>>>>>>>>>>>>>>>>>>>>> Then I saw this thread and thought that I'd give that a try. So it seems I
>>>>>>>>>>>>>>>>>>>>>>>>>> can not run chrome and darktable at the same time.
>>>>>>>>>>>>>>>>>>>>>>>>>> ___
>>>>>>>>>>>>>>>>>>>>>>>>>> 'lspci' shows that my graphics card is :
>>>>>>>>>>>>>>>>>>>>>>>>>> 01:00.0 VGA compatible controller: Advanced Micro
>>>>>>>>>>>>>>>>>>>>>>>>>> Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
>>>>>>>>>>>>>>>>>>>>>>>>>> and 'lspci|grep gpu' returned an empty set
>>>>>>>>>>>>>>>>>>>>>>>>>> (if I did that correctly)
>>>>>>>>>>>>>>>>>>>>>>>>>> so I suppose the cheapest way to fix this is to
>>>>>>>>>>>>>>>>>>>>>>>>>> get a gpu.... correct?
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:09 PM, Carruth, Rusty
>>>>>>>>>>>>>>>>>>>>>>>>>> <Rusty.Carruth at smartm.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> In my experience, it’s almost always Firefox
>>>>>>>>>>>>>>>>>>>>>>>>>>> taking all of memory. (Or Chrome, or whatever web browser you’re using).
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> I agree with Mr B, run top or htop and see
>>>>>>>>>>>>>>>>>>>>>>>>>>> what’s, well, on top ;-)
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Rusty
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> [image: SMART_HRS_RGB]
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Rusty Carruth | Customer Support | *rusty.carruth at smarth.com
>>>>>>>>>>>>>>>>>>>>>>>>>>> <rusty.carruth at smarth.com>* |
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.smarth.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> [image: linkedin]
>>>>>>>>>>>>>>>>>>>>>>>>>>> <https://www.linkedin.com/company/12955027/> [image:
>>>>>>>>>>>>>>>>>>>>>>>>>>> twitter] <https://twitter.com/@MilSSD>See the
>>>>>>>>>>>>>>>>>>>>>>>>>>> new M4[image:
>>>>>>>>>>>>>>>>>>>>>>>>>>> cid:image004.jpg at 01D348E7.AF930710]
>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.marketwired.com/press-release/smart-high-reliability-solutions-announces-availability-its-new-highly-ruggedized-highly-2235071.htm>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> See us on Storage Search
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.storagesearch.com/smart2.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> 510-624-5391 <(510)%20624-5391> | Fax:
>>>>>>>>>>>>>>>>>>>>>>>>>>> 480-926-5579 <(480)%20926-5579> | 1325 N.
>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiesta Blvd. Suite 101 Gilbert, Az. 85233
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> *From:* PLUG-discuss [mailto:
>>>>>>>>>>>>>>>>>>>>>>>>>>> plug-discuss-bounces at lists.phxlinux.org] *On
>>>>>>>>>>>>>>>>>>>>>>>>>>> Behalf Of *Michael Butash
>>>>>>>>>>>>>>>>>>>>>>>>>>> *Sent:* Sunday, October 29, 2017 10:05 AM
>>>>>>>>>>>>>>>>>>>>>>>>>>> *To:* Main PLUG discussion list
>>>>>>>>>>>>>>>>>>>>>>>>>>> *Subject:* Re: computer slow
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> If I ever have that, it's usually because of
>>>>>>>>>>>>>>>>>>>>>>>>>>> something with a memory leak, or desktop graphic compositing is degrading
>>>>>>>>>>>>>>>>>>>>>>>>>>> over time.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Before you reboot, see if you can ssh into it
>>>>>>>>>>>>>>>>>>>>>>>>>>> from another computer and check htop (or just top all you have), see if
>>>>>>>>>>>>>>>>>>>>>>>>>>> something is consuming all your memory or cpu.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Desktop compositors are all shite from what I
>>>>>>>>>>>>>>>>>>>>>>>>>>> can tell (including windoze), they're all just a varying degree of broken
>>>>>>>>>>>>>>>>>>>>>>>>>>> when you push them, or just have a slow (or buggy) video card. Depending
>>>>>>>>>>>>>>>>>>>>>>>>>>> on your desktop environment of choice, try turning down graphics options,
>>>>>>>>>>>>>>>>>>>>>>>>>>> or disabling the compositor all together to see if it helps stability.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> -mb
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Sun, Oct 29, 2017 at 3:41 AM, Michael <
>>>>>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm almost certain that in my bag of tricks I
>>>>>>>>>>>>>>>>>>>>>>>>>>> had instructions on 'resetting' my computer when it started acting weird
>>>>>>>>>>>>>>>>>>>>>>>>>>> but I can't find them. Riddle me this: I try to leave the computer on 24/7
>>>>>>>>>>>>>>>>>>>>>>>>>>> (maybe I shouldn't do that) and twice so far I come up to it and it is
>>>>>>>>>>>>>>>>>>>>>>>>>>> non-responsive or really slow to respond. Anyone know how to fix this?
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your
>>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings:
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your
>>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings:
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> A mouse trap, placed on top of your alarm clock,
>>>>>>>>>>>>>>>>>>>>>>>>> will prevent you from rolling over and going back to sleep after you hit
>>>>>>>>>>>>>>>>>>>>>>>>> the snooze button.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Stephen
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.or
>>>>>>>>>>>>>>>>> g
>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>
>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------
>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> :-)~MIKE~(-:
>>>>>>>>
>>>>>>>> ---------------------------------------------------
>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------
>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> :-)~MIKE~(-:
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> :-)~MIKE~(-:
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> :-)~MIKE~(-:
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
--
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/89420a5e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 449 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/89420a5e/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1987 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/89420a5e/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 651 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/89420a5e/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 1095 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/89420a5e/attachment.jpg>
More information about the PLUG-discuss
mailing list