computer slow
Michael
bmike1 at gmail.com
Mon Oct 30 17:35:09 MST 2017
'coo' is supposed to read 'cool' as in not shorts temperature
On Mon, Oct 30, 2017 at 8:33 PM, Michael <bmike1 at gmail.com> wrote:
> I'm just about to take a reading and then run stress again. It is pretty
> coo, in here so not sure if a fan would do any good.
> $ sensors
> radeon-pci-0100
> Adapter: PCI adapter
> temp1: +74.5°C
>
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1: +51.6°C (high = +70.0°C)
> (crit = +72.0°C, hyst = +70.0°C)
>
> want me to crash it now?
>
>
> On Mon, Oct 30, 2017 at 8:30 PM, Brien Dieterle <briend at gmail.com> wrote:
>
>> Well, those temperatures are not that hot, but that doesn't mean some
>> cooling wouldn't improve things.
>> Have you popped the case off and pointed a big fan in there and tried to
>> reproduce the crash yet?
>>
>> On Mon, Oct 30, 2017 at 5:21 PM, Michael <bmike1 at gmail.com> wrote:
>>
>>> Here is around 180 seconds of readings at around 10 second intervals (if
>>> it helps):
>>>
>>> $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +74.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.5°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.0°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.0°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.4°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.2°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.0°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.5°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +50.9°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +53.6°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +52.4°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.8°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +74.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.1°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +74.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.0°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +74.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +52.0°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +74.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +50.6°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +74.5°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.4°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.8°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>> bmike1 at MikesBeast ~ $ sensors
>>> radeon-pci-0100
>>> Adapter: PCI adapter
>>> temp1: +75.0°C
>>>
>>> k10temp-pci-00c3
>>> Adapter: PCI adapter
>>> temp1: +51.9°C (high = +70.0°C)
>>> (crit = +72.0°C, hyst = +70.0°C)
>>>
>>>
>>> On Mon, Oct 30, 2017 at 7:39 PM, Brien Dieterle <briend at gmail.com>
>>> wrote:
>>>
>>>> 30 mins is plenty for a test. Try to get sensors output just before a
>>>> crash
>>>>
>>>> On Mon, Oct 30, 2017 at 4:25 PM, Michael <bmike1 at gmail.com> wrote:
>>>>
>>>>> how long do you want me to run glmark2 for? Forever is not feasible!
>>>>>
>>>>> On Mon, Oct 30, 2017 at 7:22 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>
>>>>>> as for the shutoff point everything that had anything to do with
>>>>>> cutting power was already diabled
>>>>>>
>>>>>> On Mon, Oct 30, 2017 at 7:20 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>>
>>>>>>> $ sensors
>>>>>>> radeon-pci-0100
>>>>>>> Adapter: PCI adapter
>>>>>>> temp1: +68.0°C
>>>>>>>
>>>>>>> k10temp-pci-00c3
>>>>>>> Adapter: PCI adapter
>>>>>>> temp1: +45.1°C (high = +70.0°C)
>>>>>>> (crit = +72.0°C, hyst = +70.0°C)
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Oct 30, 2017 at 7:07 PM, Brien Dieterle <briend at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Well, it might be protecting your computer but if it is too low it
>>>>>>>> will just be annoying.
>>>>>>>> You still need to run sensors and get those numbers if you haven't
>>>>>>>> yet:
>>>>>>>>
>>>>>>>> https://askubuntu.com/questions/15832/how-do-i-get-the-cpu-t
>>>>>>>> emperature
>>>>>>>>
>>>>>>>> If your machine is legitimately overheating you need to address
>>>>>>>> that with fans and ventilation, etc.
>>>>>>>>
>>>>>>>> On Mon, Oct 30, 2017 at 3:59 PM, Michael <bmike1 at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> if there is a shutoff point you did say disable it?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, Oct 30, 2017 at 6:56 PM, Brien Dieterle <briend at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Well, you're on the right track. Try to isolate whether glmark
>>>>>>>>>> alone can crash it, or if you need stress as well. Then try opening up
>>>>>>>>>> your case and point a fan in there.
>>>>>>>>>> Also don't forget to check the BIOS for thermal management events
>>>>>>>>>> that might be causing the shutdown/reboot.
>>>>>>>>>>
>>>>>>>>>> On Mon, Oct 30, 2017 at 3:52 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> never mind..... I ran glmark around 5 minutes and then stress.
>>>>>>>>>>> that crashed the machine! Not a nice reboot (like what it does with dt) but
>>>>>>>>>>> a power failure outage,
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:41 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> and if glmark2 doesn't crash it run stress the same amount of
>>>>>>>>>>>> time?
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:37 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> how long do I let glmark2's pretty horse rotate?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:36 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> okay
>>>>>>>>>>>>>> `
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 6:10 PM, Brien Dieterle <
>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'd wait. If stress alone doesn't crash, run glmark2 by
>>>>>>>>>>>>>>> itself. If glmark2 doesn't crash, run them both at the same time.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:01 PM, Michael <bmike1 at gmail.com>
>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> run this now or after stress completes?
>>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:59 PM, Brien Dieterle <
>>>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Well, not yet ;-). If it doesn't crash, you might need
>>>>>>>>>>>>>>>>> to stress the graphics card as well with one of these tools:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> https://www.pcsuggest.com/gpu-
>>>>>>>>>>>>>>>>> benchmarking-and-stress-testing-in-linux/
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> So maybe kick off both stress and
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> glmark2 --run-forever
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:55 PM, Michael <bmike1 at gmail.com
>>>>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> if it doesn't crash I'll start hounding the darktable
>>>>>>>>>>>>>>>>>> forums.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:45 PM, Michael <
>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Just started..... lets see what happens
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 5:36 PM, Brien Dieterle <
>>>>>>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Forget darktable for now. Did you run stress test for
>>>>>>>>>>>>>>>>>>>> more than 10 seconds?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> This will run a stress test for 30 minutes:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> stress --cpu 8 --io 4 --vm 2 --hdd 2 --timeout 1800s
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> If you can get it to crash with just this stress
>>>>>>>>>>>>>>>>>>>> program, then it has nothing to do with darktable
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 2:24 PM, Michael <
>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I have no sensors running and as for it panicing when
>>>>>>>>>>>>>>>>>>>>> warm sometimes it panics after I run dt 2 minutes after it had been shut
>>>>>>>>>>>>>>>>>>>>> down an hour and doesn't panic even though dt had run10 minutes.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 4:31 PM, Brien Dieterle <
>>>>>>>>>>>>>>>>>>>>> briend at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Check your bios settings for hardware monitoring and
>>>>>>>>>>>>>>>>>>>>>> temperature limits. You may have it set with a maximum temperature so the
>>>>>>>>>>>>>>>>>>>>>> machine panics when it's just warm.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Try raising this number or disabling the feature
>>>>>>>>>>>>>>>>>>>>>> entirely
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> But first check your sensors by installing a
>>>>>>>>>>>>>>>>>>>>>> temperature monitoring program
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Oct 30, 2017 1:04 PM, "Michael" <bmike1 at gmail.com>
>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> it is sooo ify! I just ran it for like 10 minutes
>>>>>>>>>>>>>>>>>>>>>>> with no crashes whereas before I had just started the computer and ran dt
>>>>>>>>>>>>>>>>>>>>>>> for 2 minutes and it crashed. Then I restarted and I had a repeat
>>>>>>>>>>>>>>>>>>>>>>> performance of the 2 minute thing.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:38 PM, Michael <
>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> $ stress --cpu 8 --io 4 --vm 2 --vm-bytes 128M
>>>>>>>>>>>>>>>>>>>>>>>> --timeout 10s
>>>>>>>>>>>>>>>>>>>>>>>> stress: info: [7571] dispatching hogs: 8 cpu, 4 io,
>>>>>>>>>>>>>>>>>>>>>>>> 2 vm, 0 hdd
>>>>>>>>>>>>>>>>>>>>>>>> stress: info: [7571] successful run completed in 10s
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I don't know what that was suppossed to tell me
>>>>>>>>>>>>>>>>>>>>>>>> but there it is.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:36 PM, Michael <
>>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I am experiencing no slowness. It is like the days
>>>>>>>>>>>>>>>>>>>>>>>>> where you had a power switch on the back of your computer... or it is like
>>>>>>>>>>>>>>>>>>>>>>>>> a hard reboot.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 3:33 PM, Stephen
>>>>>>>>>>>>>>>>>>>>>>>>> Partington <cryptworks at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> OpenCL in darktable mainly impacts rendering. it
>>>>>>>>>>>>>>>>>>>>>>>>>> should have no effect on on system or ram consumption unless you are
>>>>>>>>>>>>>>>>>>>>>>>>>> experiencing slowness during render cycles.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:21 PM, Michael <
>>>>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> You know.... I'm having trouble running
>>>>>>>>>>>>>>>>>>>>>>>>>>> darktable. It seems that after I start it it runs a few minutes and then
>>>>>>>>>>>>>>>>>>>>>>>>>>> reboots the computer. Probably because I do not have a GPU (I don't think).
>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I saw this thread and thought that I'd give that a try. So it seems I
>>>>>>>>>>>>>>>>>>>>>>>>>>> can not run chrome and darktable at the same time.
>>>>>>>>>>>>>>>>>>>>>>>>>>> ___
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'lspci' shows that my graphics card is :
>>>>>>>>>>>>>>>>>>>>>>>>>>> 01:00.0 VGA compatible controller: Advanced
>>>>>>>>>>>>>>>>>>>>>>>>>>> Micro Devices, Inc. [AMD/ATI] RV770 [Radeon HD 4850]
>>>>>>>>>>>>>>>>>>>>>>>>>>> and 'lspci|grep gpu' returned an empty set
>>>>>>>>>>>>>>>>>>>>>>>>>>> (if I did that correctly)
>>>>>>>>>>>>>>>>>>>>>>>>>>> so I suppose the cheapest way to fix this is to
>>>>>>>>>>>>>>>>>>>>>>>>>>> get a gpu.... correct?
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Mon, Oct 30, 2017 at 12:09 PM, Carruth, Rusty
>>>>>>>>>>>>>>>>>>>>>>>>>>> <Rusty.Carruth at smartm.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> In my experience, it’s almost always Firefox
>>>>>>>>>>>>>>>>>>>>>>>>>>>> taking all of memory. (Or Chrome, or whatever web browser you’re using).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I agree with Mr B, run top or htop and see
>>>>>>>>>>>>>>>>>>>>>>>>>>>> what’s, well, on top ;-)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Rusty
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> [image: SMART_HRS_RGB]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Rusty Carruth | Customer Support | *rusty.carruth at smarth.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>> <rusty.carruth at smarth.com>* |
>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.smarth.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> [image: linkedin]
>>>>>>>>>>>>>>>>>>>>>>>>>>>> <https://www.linkedin.com/company/12955027/> [image:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> twitter] <https://twitter.com/@MilSSD>See the
>>>>>>>>>>>>>>>>>>>>>>>>>>>> new M4[image:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> cid:image004.jpg at 01D348E7.AF930710]
>>>>>>>>>>>>>>>>>>>>>>>>>>>> <http://www.marketwired.com/press-release/smart-high-reliability-solutions-announces-availability-its-new-highly-ruggedized-highly-2235071.htm>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> See us on Storage Search
>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.storagesearch.com/smart2.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 510-624-5391 <(510)%20624-5391> | Fax:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> 480-926-5579 <(480)%20926-5579> | 1325 N.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Fiesta Blvd. Suite 101 Gilbert, Az. 85233
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> *From:* PLUG-discuss [mailto:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> plug-discuss-bounces at lists.phxlinux.org] *On
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Behalf Of *Michael Butash
>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Sent:* Sunday, October 29, 2017 10:05 AM
>>>>>>>>>>>>>>>>>>>>>>>>>>>> *To:* Main PLUG discussion list
>>>>>>>>>>>>>>>>>>>>>>>>>>>> *Subject:* Re: computer slow
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> If I ever have that, it's usually because of
>>>>>>>>>>>>>>>>>>>>>>>>>>>> something with a memory leak, or desktop graphic compositing is degrading
>>>>>>>>>>>>>>>>>>>>>>>>>>>> over time.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Before you reboot, see if you can ssh into it
>>>>>>>>>>>>>>>>>>>>>>>>>>>> from another computer and check htop (or just top all you have), see if
>>>>>>>>>>>>>>>>>>>>>>>>>>>> something is consuming all your memory or cpu.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Desktop compositors are all shite from what I
>>>>>>>>>>>>>>>>>>>>>>>>>>>> can tell (including windoze), they're all just a varying degree of broken
>>>>>>>>>>>>>>>>>>>>>>>>>>>> when you push them, or just have a slow (or buggy) video card. Depending
>>>>>>>>>>>>>>>>>>>>>>>>>>>> on your desktop environment of choice, try turning down graphics options,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> or disabling the compositor all together to see if it helps stability.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> -mb
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Sun, Oct 29, 2017 at 3:41 AM, Michael <
>>>>>>>>>>>>>>>>>>>>>>>>>>>> bmike1 at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm almost certain that in my bag of tricks I
>>>>>>>>>>>>>>>>>>>>>>>>>>>> had instructions on 'resetting' my computer when it started acting weird
>>>>>>>>>>>>>>>>>>>>>>>>>>>> but I can't find them. Riddle me this: I try to leave the computer on 24/7
>>>>>>>>>>>>>>>>>>>>>>>>>>>> (maybe I shouldn't do that) and twice so far I come up to it and it is
>>>>>>>>>>>>>>>>>>>>>>>>>>>> non-responsive or really slow to respond. Anyone know how to fix this?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your
>>>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your
>>>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your
>>>>>>>>>>>>>>>>>>>>>>>>>>> mail settings:
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>> A mouse trap, placed on top of your alarm clock,
>>>>>>>>>>>>>>>>>>>>>>>>>> will prevent you from rolling over and going back to sleep after you hit
>>>>>>>>>>>>>>>>>>>>>>>>>> the snooze button.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Stephen
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------
>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mail
>>>>>>>>>>>>>>>>>>>>> man/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>>> PLUG-discuss mailing list -
>>>>>>>>>>>>>>>>>> PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail
>>>>>>>>>>>>>>>>>> settings:
>>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.or
>>>>>>>>>>>>>>>>> g
>>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>>>
>>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ---------------------------------------------------
>>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> :-)~MIKE~(-:
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------
>>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------
>>>>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> :-)~MIKE~(-:
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> :-)~MIKE~(-:
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> :-)~MIKE~(-:
>>>>>
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>>
>>> --
>>> :-)~MIKE~(-:
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
>
> --
> :-)~MIKE~(-:
>
--
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/1c078b8c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 1095 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/1c078b8c/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 651 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/1c078b8c/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1987 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/1c078b8c/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 449 bytes
Desc: not available
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20171030/1c078b8c/attachment-0002.png>
More information about the PLUG-discuss
mailing list