rsync

[Michael]

~ $ sudo fsck.msdos -f /dev/sdc
fsck.fat 3.0.28 (2015-05-16)
Logical sector size is zero.
 ~ $ sudo fsck.msdos -f /dev/sdc1
fsck.fat 3.0.28 (2015-05-16)
Currently, only 1 or 2 FATs are supported, not 0.

 ~ $ sudo fsck.msdos /dev/sdc1
fsck.fat 3.0.28 (2015-05-16)
Currently, only 1 or 2 FATs are supported, not 0.

 ~ $ sudo fsck.msdos /dev/sdc
fsck.fat 3.0.28 (2015-05-16)
Logical sector size is zero.


On Fri, Sep 22, 2017 at 11:42 PM, Eric Oyen <eric.oyen at icloud.com> wrote:

> actually, if you install the FUSE package, there should be more advanced
> handlers to correct some of those errors. I use something like that here to
> correct issues on an NTFS external drive while in OS X. The preference
> package includes linux code for the FUSE project and seems to work
> reasonably well for most issues. However, there are some issues that
> require the use of a real windows installation to correct.
>
> -eric
> from the central office of the Technomage Guild, Storage Analysis Division.
>
> On Sep 22, 2017, at 6:31 PM, Michael wrote:
>
> silly me! I just realized that the file system on the external drive is
> NTFS so there isn't much I can do with it.
>
> On Fri, Sep 22, 2017 at 4:05 PM, Michael <bmike1 at gmail.com> wrote:
>
>> :/
>>  ~ $ sudo fsck -f /dev/sda1
>> fsck from util-linux 2.27.1
>>  ~ $ sudo fsck -f /dev/sda
>> fsck from util-linux 2.27.1
>> e2fsck 1.42.13 (17-May-2015)
>> ext2fs_open2: Bad magic number in super-block
>> fsck.ext2: Superblock invalid, trying backup blocks...
>> fsck.ext2: Bad magic number in super-block while trying to open /dev/sda
>>
>> The superblock could not be read or does not describe a valid
>> ext2/ext3/ext4
>> filesystem.  If the device is valid and it really contains an
>> ext2/ext3/ext4
>> filesystem (and not swap or ufs or something else), then the superblock
>> is corrupt, and you might try running e2fsck with an alternate superblock:
>>     e2fsck -b 8193 <device>
>>  or
>>     e2fsck -b 32768 <device>
>>
>> gparted says the device is on sda1
>>
>> On Fri, Sep 22, 2017 at 12:14 PM, Carruth, Rusty <
>> Rusty.Carruth at smartm.com> wrote:
>>
>>> Try fsck –f (for force).  If the filesystem is marked clean and some
>>> other stuff it won’t run the test, IIRC.
>>>
>>>
>>>
>>> *From:* PLUG-discuss [mailto:plug-discuss-bounces at lists.phxlinux.org] *On
>>> Behalf Of *Michael
>>> *Sent:* Friday, September 22, 2017 5:15 AM
>>> *To:* Main PLUG discussion list
>>> *Subject:* Re: rsync
>>>
>>>
>>>
>>> $ sudo fsck /dev/sdc1
>>>
>>> fsck from util-linux 2.27.1
>>>
>>> $
>>>
>>>
>>>
>>> isn't it supposed to give a code of some sort?
>>>
>>> Here is a mall snippet of the errors it gives when trying to rsync to
>>> the drive:
>>>
>>>
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46403032.ini")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46403576.xml")
>>> failed: Input/output error (5)
>>>
>>>
>>>
>>> here is a snippet of the errors I get when trying to  delete the file
>>> recovery directory:
>>>
>>>
>>>
>>> rm: cannot remove 'file recovery/recup_dir.465/f46401688.xml.gz':
>>> Input/output error
>>>
>>> rm: cannot remove 'file recovery/recup_dir.465/f46401920.xml.gz':
>>> Input/output error
>>>
>>>
>>>
>>> any ideas how I can delete  them?
>>>
>>>
>>>
>>>
>>>
>>> On Thu, Sep 7, 2017 at 5:36 PM, James Dugger <james.dugger at gmail.com>
>>> wrote:
>>>
>>> You potentially have corrupt files or problems with your disk. Use the
>>> fsck command to check files/file system and smartctl command to check the
>>> disk
>>>
>>>
>>>
>>> On Sep 7, 2017 4:52 AM, "Michael" <bmike1 at gmail.com> wrote:
>>>
>>> I get the following errors. How do I stop it?
>>>
>>> $ rsync -aWuq --delete-before /home/bmike1/Documents
>>> /media/bmike1/"Seagate Expansion Drive"
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46038464.elf")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46285928.txt")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46399616.bz2")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46399920.xml")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46400256.bz2")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46400560_tooltip.svg.gz")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46400824_analog_meter.svg.gz")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f464010
>>> 72_extender-background.svg.gz") failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46401488.xml.gz")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46401688.xml.gz")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46401920.xml.gz")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46402208.xml.gz")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46402688.png")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46403032.ini")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46403576.xml")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46404144.xml")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46404624.xml")
>>> failed: Input/output error (5)
>>>
>>> rsync: readlink_stat("/media/bmike1/Seagate Expansion
>>> Drive/Documents/Programs/file recovery/recup_dir.465/f46405344.xml")
>>> failed: Input/output error (5)
>>>
>>> rsync error: some files/attrs were not transferred (see previous errors)
>>> (code 23) at main.c(1183) [sender=3.1.1]
>>>
>>>
>>>
>>> --
>>>
>>> :-)~MIKE~(-:
>>>
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>> :-)~MIKE~(-:
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>
>
>
> --
> :-)~MIKE~(-:
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>



-- 
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20170923/5b8903bb/attachment.html>