setting up file system

Fri Jul 25 13:54:50 MST 2014

I was so excited! I installed the debian syatem but when I tried to mount
the LFS partition it said

"mount: wrong fs type, bad option, bad superblock on /dev/sda9,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so"

then as I was trying to investigate the LFS partitions cfdisk wouldn't even
start and fdisk kept saying

"Warning: invalid flag 0x0000 of partition table 4 will be corrected by
w(rite)"

Writing didn't correct the problem so instead of bugging you I figured that
this might have something to do with the fact that I set the  LFS
partitions up when I installed debian. So I reinstalled debian w/o setting
up the LFS partitions and now now cfdisk starts and I set the partitions
up. But it won't let me create the file system. this is what happens:

root at debian:~# mkfs -v -t ext4 /dev/sda6
mke2fs 1.42.5 (29-Jul-2012)
Could not stat /dev/sda6 --- No such file or directory
The device apparently does not exist; did you specify it correctly?

root at debian:~# fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders, total 488281250 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0007bc26
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1            2048     7813119     3905536   82  Linux swap / Solaris
/dev/sda2         7815166   488281249   240233042    5  Extended
/dev/sda5   *     7815168   105469951    48827392   83  Linux
/dev/sda6       437499848   476569864    19535008+  83  Linux
/dev/sda7       476569928   488281249     5855661   82  Linux swap / Solaris

as you can see the device does exist. sda1 is swap for the debian system
which is in sda5. sda6 is going to be the LFS system and sda7 is going to
be the swap for LFS when I get done.

Please, what did I do wrong or else what is the problem?

:-)~MIKE~(-:

On Thu, Jul 24, 2014 at 6:11 AM, Michael Havens <bmike1 at gmail.com> wrote:

> well..... I just  realized that there must be a reason that the glibc line
> was commented out in the LFS book so I'm not going to worry about it.
> regarding your line I did enter it and it  returned nothing. then I re-read
> the the text concerning that and it finally dawned on me..... I want all of
> them or none of them and if I only had 1 or two of them it is okay to
> delete the ones that are there. I get there.... even if it does take me a
> little longer. I wish this wasn't the case but at least I can blame the
> head injury for the difficulties. I'll start working on it when I get home
> from work tonight.
>
> :-)~MIKE~(-:
>
>
> On Thu, Jul 24, 2014 at 5:27 AM, <kitepilot at kitepilot.com> wrote:
>
>> Michael, have you even looked at what is in line 32 of your
>> version-check.sh?
>> Among other things, because 'glibc' is more than a program (it is more
>> like the whole engine running under the hood), and your system would not
>> even boot up is you don't have 'glibc' (which is a whole lot system)
>> You'll learn that as you read LFS.
>> Did you ever try:
>> find /lib/ /*/lib/ -name lib${X}.la
>> ET
>>
>> Michael Havens writes:
>>
>>> well, I didn't have a problem getting these files with a standard
>>> installation of debian; it was only after I tried with a net install of
>>> debia. So right now I'm downloading a current dvd iso of debian and after
>>> the install I'll see if that helps.
>>> :-)~MIKE~(-:
>>>
>>> On Tue, Jul 22, 2014 at 12:49 PM, Michael Havens <bmike1 at gmail.com>
>>> wrote:
>>>
>>>> well I installed gmp  the way it instructed and then I did a search for
>>>> mpfr on the same website and installed it as well, but couldn't find
>>>> gibc
>>>> or mpc. I was going to do a search for the missing files but figured I
>>>> would run version-check first to ensure I wasn't just spinning my
>>>> wheels.
>>>> It appears the two files were not installed correctly enough for LInux
>>>> from
>>>> Scratch.
>>>> gmp
>>>>
>>>> ~$ bash version-check.sh
>>>> ---truncate---
>>>> version-check.sh: line 32: glibc: command not found
>>>> g++ compilation OK
>>>> libgmp.la: found
>>>> libmpfr.la: found
>>>> libmpc.la: not found
>>>>
>>>> :-)~MIKE~(-:
>>>>
>>>> On Tue, Jul 22, 2014 at 11:25 AM, Stephen Partington <
>>>> cryptworks at gmail.com
>>>> > wrote:
>>>>
>>>>> this is what it is after:
>>>>> GNU Multiple Precision Arithmetic Library
>>>>> The GNU Multiple Precision Arithmetic Library is a free library for
>>>>> arbitrary-precision arithmetic, operating on signed integers, rational
>>>>> numbers, and floating point numbers.
>>>>> http://petio.org/tools/gmp.html has some nice refrence material as
>>>>> well.
>>>>> *Snip*
>>>>> --
>>>>> A mouse trap, placed on top of your alarm clock, will prevent you from
>>>>> rolling over and going back to sleep after you hit the snooze button.
>>>>> Stephen
>>>>>
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>>  ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.phxlinux.org/pipermail/plug-discuss/attachments/20140725/fc31d54f/attachment.html>