ethernet wiring

Bryan O'Neal Bryan.ONeal at TheONealAndAssociates.com
Sun Nov 20 13:05:44 MST 2011


Just remember there is no magic to it. You have 2 wires for TX and 2
for RX. As long as the wires match on each end (pin 1 to pin 1, pin 2
to pin 2, etc.) it does not matter what color they are.

On 11/20/11, Brian Cluff <brian at snaptek.com> wrote:
> First off, you shouldn't need to strip the wires when putting them into
> the jack,  The jacks are designed to cut through the shielding and make
> a connection directly though the shielding.  In fact, I'll bet that the
> connections are much more likely to corrode if you strip them first.
>
> As for the color sequence.  They change a bit depending on what style of
> jack you have and how much the wires twist inside the jack itself.  Just
> go ahead and wire up the jack in the color order that the jack dictates
> and it shouldn't matter if they are in different physical orders on the
> back of the jack.
>
> As for the Jack that shows yellow brown white red etc... It sounds like
> you got a hold of an rj45 based telecom jack.  I would take that back
> and get one that is made for networking.  You could probably get it to
> work just fine if you can figure out the correct wiring order, but why
> not do it right in the first place...
>
> Brian
>
> On 11/20/2011 11:28 AM, Michael Havens wrote:
>> So I'm connecting my brothers computer to the internet . I ran the wire
>> under the house yesterday (I let him do that... I didn't want to get
>> dirty) and drilled a hole today and fed the cable through the hole. Then
>> I stripped the cable; first the blue pair, then the green pair, the.....
>> I'm sure you get the point. Anyways I'm all excited because now I'm
>> going to connect the wires to the jack, then I'll do the other side,
>> then my brother is in business! Except I sit down to connect the other
>> side when I see a nightmare: instead of blue-green-orange-brown wires
>> the colors of the wires are blue, orange, black, red, green, yellow,
>> brown, and white; each designated with a number: 1 to 8. Any idea how I
>> should wire these?
>>
>> --
>> :-)~MIKE~(-:
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>

-- 
Sent from my mobile device


More information about the PLUG-discuss mailing list