ide-eide
Michael Havens
bmike1 at gmail.com
Sun Nov 20 00:30:42 MST 2011
i need too look closer... it is a lap top drive. Darn!
On Sun, Nov 20, 2011 at 12:27 AM, Michael Havens <bmike1 at gmail.com> wrote:
> how about this drive:
>
>
> http://www.google.com/products/catalog?client=ubuntu&channel=fs&q=ide+hard+drive&oe=utf-8&um=1&ie=UTF-8&tbm=shop&cid=7836135078448000879&sa=X&ei=vqrITpTSDqOyiQKi4837Dw&ved=0CLwBEPICMAM
>
> it is only 80 gb. Is that too big?
>
>
> On Sun, Nov 20, 2011 at 12:15 AM, Michael Havens <bmike1 at gmail.com> wrote:
>
>> I gave up on the external hd aspirations because my mobo probably won't
>> boot a USB. You say that older mobos have problems recognizing larger
>> disks.... 160 gb is probably one of those. Could I partition it maybe and
>> it would see more of it... is there a work around?
>>
>> On Sat, Nov 19, 2011 at 8:32 PM, Jim March <1.jim.march at gmail.com> wrote:
>>
>>> Let me add some hard disk advice, regardless of whether you do IDE/PATA
>>> or SATA.
>>>
>>> Laptop-class drives (2.5") are smaller and slower than a desktop-class
>>> drive (3.5"). BUT the laptop drives are much tougher, esp. in terms of
>>> drop-resistance, and put out a lot less heat.
>>>
>>> You'll pay more for the gigabyte for a laptop-class drive.
>>>
>>> If you're using a laptop IDE drive in a desktop computer, you need an
>>> adapter to make it work. Costs $5 at Fry's Electronics. On SATA drives
>>> the connectors are the same for laptop or desktop.
>>>
>>> If you have a motherboard without SATA support, a SATA PCI adapter card
>>> is very cheap - about $20 tops (Fry's has tons). It can be a much, much
>>> better idea to buy a SATA drive plus PCI adapter now as opposed to an IDE
>>> drive for an older motherboard. By jumping to SATA right away you gain the
>>> ability to upgrade to a hotter SATA-support motherboard later. And
>>> usually, the SATA PCI adapter card will let you run a big SATA drive on a
>>> motherboard that doesn't otherwise support big IDE/PATA drives, because the
>>> SATA PCI adapter takes over a lot of the hard disk support firmware from
>>> the motherboard.
>>>
>>> The best hard disks today are made by Western Digital, in my opinion. A
>>> very close second is Seagate. Comparatively speaking, the Japanese such as
>>> Hitachi, Toshiba and Fujitsu suck. In terms of reliability Samsungs from
>>> Korea are actually better than the Japanese drives. Maxtor is Seagate's
>>> "budget line" - avoid.
>>>
>>> If you're buying an external drive that is NOT made by one of the above
>>> drive-makers (LaCie, Buffalo, SimpleTech, many MANY more) then you're
>>> buying a pig in a poke. You have no idea what brand of actual drive is in
>>> there unless you either crack the case open (breaking the warrantee most
>>> likely) or you use software tools to probe the make/model info. If however
>>> you buy a Western Digital external drive fr'instance, you can take it to
>>> the bank that there's a WD drive in there. Same concept for all the rest,
>>> except that Seagate owns Maxtor and might slap a Maxtor drive under a
>>> Seagate-brand chassis.
>>>
>>> Hope this helps,
>>>
>>> Jim
>>>
>>>
>>> On Sat, Nov 19, 2011 at 7:18 PM, JD Austin <jd at twingeckos.com> wrote:
>>>
>>>> IDE, EIDE, and PATA (Parallel ATA) have the same interface.
>>>> http://en.wikipedia.org/wiki/Parallel_ATA
>>>>
>>>> Older motherboards may have trouble recognizing larger drives.
>>>> IDE/EIDE/PATA is on it's way out.... get SATA if you have a choice
>>>> since it's unlikely you'll find a motherboard with EIDE on it.
>>>> Open Box= someone else didn't like it.
>>>> I'd go SATA if I were you (supports native hot swapping).
>>>> http://en.wikipedia.org/wiki/Serial_ATA
>>>> I often use laptop drives for such things.
>>>>
>>>> On Sat, Nov 19, 2011 at 18:48, Michael Havens <bmike1 at gmail.com> wrote:
>>>>
>>>>> this is the ad:
>>>>>
>>>>> http://www.macconnection.com/IPA/Shop/Product/Detail.htm?sku=8239542&cm_mmc=Base-_-8239542-_-Used-_-WN3&ci_src=14110944&ci_sku=8239542
>>>>>
>>>>>
>>>>> On Sat, Nov 19, 2011 at 6:44 PM, Michael Havens <bmike1 at gmail.com>wrote:
>>>>>
>>>>>> I have a sales guy telling me at http://www.macconnection.com/ that
>>>>>> an eide drive (theirs) will work on an IDE system. Is this true. As stated
>>>>>> before I don't know if my system is ide or eide. I have an IBM NetVista
>>>>>> computer. This is what they're trying to sell:
>>>>>> Open Box Western Digital 160GB Caviar SE EIDE 3.5" Hard Drive - 8MB
>>>>>> Cache
>>>>>>
>>>>>> --
>>>>>> :-)~MIKE~(-:
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> :-)~MIKE~(-:
>>>>>
>>>>> ---------------------------------------------------
>>>>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------
>>>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>>> To subscribe, unsubscribe, or to change your mail settings:
>>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>>
>>>
>>>
>>> ---------------------------------------------------
>>> PLUG-discuss mailing list - PLUG-discuss at lists.plug.phoenix.az.us
>>> To subscribe, unsubscribe, or to change your mail settings:
>>> http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
>>>
>>
>>
>>
>> --
>> :-)~MIKE~(-:
>>
>
>
>
> --
> :-)~MIKE~(-:
>
--
:-)~MIKE~(-:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.PLUG.phoenix.az.us/pipermail/plug-discuss/attachments/20111120/1436212a/attachment.html>
More information about the PLUG-discuss
mailing list