I have found that numerous bluetooth sound devices treat each connection
type as a separate device when connected to a computer. Do you have more
than one listed?
On Sat, Jan 11, 2025 at 11:33 PM Jim via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
> Bluetooth and my Kubuntu 24.04.1 installation don't seem to get along.
> I have one of those bluetooth stereo speaker boxes that I use with the
> system sometimes. It can be used as a speaker that works with a phone,
> or with the computer or phone. The problem is that when I boot the
> machine and try to connect to those speakers, it connects using one of
> the codecs that's meant to be used with a phone. In that mode, the
> sound is mono and sounds like it's being played back over a phone.
> Obviously not desirable for listening to music. When I open
> blueman-manager, the following audio profiles are available:
>
> off
> headset head unit (HSP/HFP)
> Headset Head Unit (HSP/HFP, codec CVSD)
> Headset Head Unit (HSP/HFP, codec mSBC)
>
> After I go through the procedure I've worked out, it connects in high
> fidelity mode with the following options available under audio profile
> in blueman-manager. The X is next to the one it's using.
>
> off
> headset head unit (HSP/HFP)
> High Fidelity Playback (A2DP Sink Codec SBC)
> X High Fidelity Playback (A2DP Sink Codec SBC SBC-XQ)
> Headset Head Unit (HSP/HFP, codec CVSD)
> Headset Head Unit (HSP/HFP, codec mSBC)
>
> Here's what I have to do to use the high fidelity mode.
>
> Unplug the bluetooth dongle
> Restart bluetooth
> Plug in dongle
> Launch blueman manager then search for speaker, then connect to it.
>
> The problem isn't limited to one bluetooth dongle or the speakers I
> have. I've used other bluetooth dongles and other speakers but the
> problem still persists.
>
> Here's what hciconfig shows.
>
> hci0: Type: Primary Bus: USB
> BD Address: 08:BE:AC:32:79:8D ACL MTU: 1021:6 SCO MTU: 255:12
> UP RUNNING
> RX bytes:911592 acl:194 sco:0 events:128617 errors:0
> TX bytes:65920621 acl:125374 sco:0 commands:3234 errors:0
> Features: 0xff 0xff 0xff 0xfe 0xdb 0xfd 0x7b 0x87
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: PERIPHERAL ACCEPT
> Name: 'ladmo'
> Class: 0x7c0104
> Service Classes: Rendering, Capturing, Object Transfer, Audio,
> Telephony
> Device Class: Computer, Desktop workstation
> HCI Version: 5.1 (0xa) Revision: 0xdfc6
> LMP Version: 5.1 (0xa) Subversion: 0xd922
> Manufacturer: Realtek Semiconductor Corporation (93)
>
> Is there some way I can fix this. If I can't get this fixed,
> eventually I'll get an FM transmitter good for covering the yard, plug
> it into the system and take a radio outside.
>
>
> Thanks to anyone that can help me get this fixed.
>
> Jim
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
--
A mouse trap, placed on top of your alarm clock, will prevent you from
rolling over and going back to sleep after you hit the snooze button.
Stephen
---------------------------------------------------
PLUG-discuss mailing list:
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)