okay.... got it all taken care of. my issue was that I had photos on an
ext3 file system and I needed windows to read it. I took care of it by
booting into a live disk, formatting a stick to a msdos filesystem, copying
the needed pictures onto the stick, chmod 777 these files, and all is good
now!
On Thu, May 23, 2024 at 5:07 AM Eric Oyen via PLUG-discuss <
plug-discuss@lists.phxlinux.org> wrote:
> Actually, no you don’t.
>
> I am familiar enough with most of the virtual machine platforms to know
> that you can assign a drive or other device directly to the vm for use. In
> VMWare, it’s actually pretty easy in the setup. Virtualbox has something
> similar. Also, you can even dedicate a device directly to the vm,
> especially if it’s on a USB port. At that point, the VM has exclusive
> control of the device in question. Also, as for direct filesystem access,
> this can be easily achieved using an external drive for the filesystem you
> wish to use (including but not limited to having it as bootable media,
> setting up the filesystem type and various other features. Honestly,
> though, if you want, you can backup your windows machine, install linux,
> and then use a VM to host windows. That is what I did from late 2004 on,
> using an older AMD X2 processor, plenty of internal drives and even setting
> up a virtual bridge. I had windows 2k on one instance, openBSD on another
> (as the system firewall and even assigned an external interface to it
> directly). When I got done, I had a machine with a linux host, 5 virtual
> machines, and lots of available processing power for all that I needed. I
> even set up an NFS volume, and also a PXE boot server. Certainly made life
> a bit more convenient with evrrything on a single machine (hardware) and 5
> or 6 remote machines in the house, all being PXE booted. I haven’t really
> done much of this in the last half decade, but it shouldn’t be all that
> hard to get back into it. My only difficulty with doing everything like
> this at the time was some accessibility issues that required a small bit of
> sighted assistance to get around certain setup issues.
>
> -Eric
> From the Central Offices of the Technomage Guild, Virtual Machine
> Engineering Dept.
>
>
> On May 21, 2024, at 8:02 PM, Michael via PLUG-discuss <
> plug-discuss@lists.phxlinux.org> wrote:
>
> wsl won't work. I need to have access to an optical drive. So I need to
> wait until I can get a dedicATED LINUX BOX.
>
> On Tue, May 21, 2024 at 10:22 PM Eric Oyen via PLUG-discuss <
> plug-discuss@lists.phxlinux.org> wrote:
>
>> Um,
>>
>> Given you are on a windows box, wouldn’t it be easier to run VMWare or
>> some other virtual machine platform? I do that here on my OS X system when
>> I need linux (and ORCA screen reader). Sure, macports (the unix and linux
>> like ports software library) can be useful without having to deal with a
>> VM, but X desktops aren’t accessible with the built in screen reader and
>> ORCA is not in the macports library. :( So, even though I am stuck on a
>> 2012 Mac mini (and I don’t have the funds for upgrading), I can still use
>> most of the latest available (and accessible) X desktop items and ORCA from
>> inside the VM (including latest LTS versions of Ubuntu) It also means I
>> don’t need to create a bootcamp partition for the other OS, although that
>> can sometimes be more useful than a VM.
>>
>> As for windows, too much is hit and miss on that platform accessibility
>> wise for me to use it reliably. Sure, the NVDA screen reader is open
>> source, but doesn’t work with everything and JAWS costs about $100 a year
>> for a license and also doesn’t work with everything. That is basically why
>> I avoid windows unless I have no other choice.
>>
>> The only issue I have with apple products is that the EFI has no
>> accessibility whatsoever (in fact, none of the available hardware anywhere
>> on the market for computing has accessibility on the EFI). So, if I want to
>> convert my old Mac mini into a dedicated linux machine, I would have to
>> have sighted assistance to do so (a non starter here). And yes, I have even
>> proposed to the EFI consortium the use of BrlTTY in the EFI as an
>> accessibility option (it is, after all, an embedded linux). Yet, I see no
>> response from them at all and I have tried every year since 2010. Guess we
>> blind computer techs don’t mean squat unless we can bring a lot of money to
>> the table. Now, if I knew the full in’s and out’s of how the EFI is
>> installed, configured and compiled, then it wouldn’t be hard to create my
>> own version with a built-in braille and speech interface. That would
>> provide a Fiat Accompli to the industry in general and allow many more like
>> me into the full IT fields without having to demand more reasonable
>> accommodations. Ah well, I have diverged from the original subject a bit,
>> but it is, at least, minimally related to this thread.
>>
>> Anyway, since windows support for Unix services is a bit proprietary, why
>> not just go with a VM and call it good?
>>
>> -Eric
>> From the Central Offices of the Technomage Guild, Engineering and
>> Development Dept.
>>
>>
>> On May 21, 2024, at 11:18 AM, Michael via PLUG-discuss <
>> plug-discuss@lists.phxlinux.org> wrote:
>>
>> well, I'm stuck in a world of windows now. but I gots to use linux so I'm
>> doing wsl. How do I get gui to work: I ran apt update/upgrade/xinit but it
>> responds with:
>>
>> _XSERVTansmkdir: Mode....X11-unix should.... 1777
>> _XSERVTransCreateListener: failed...
>> _XSERVTransUNIX...:failed
>> _XSERVTransMakeALL... failed...
>> etc....
>>
>> So could someone help me get x going until I can get a beloved linux box
>> again?
>> --
>> :-)~MIKE~(-:
>> ---------------------------------------------------
>> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
> --
> :-)~MIKE~(-:
> ---------------------------------------------------
> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
--
:-)~MIKE~(-:
---------------------------------------------------
PLUG-discuss mailing list:
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)