Thank you to everyone who replied.
As you know I have a SOHO/business connection to COX.
Last year I configured an old laptop as a web server. It was LAMP + BIND
+ Postfix + Dovecot. I created two name servers on a domain with my
static and public IP. I then set port forwarding on my "router", and it
worked. Everything in my office is on a private IP.
I may never use anything more elaborate, however at some point I may
want more than one IP, just for the fun of it, and the level 1's cannot
tell me how to use multiple IPs. Seems it might be as simple at getting
a router that can deal with multiple IP addresses and plug it into the
Cox "Modem".
Thanks!!
Keith
On 2023-07-10 09:36, Michael Butash via PLUG-discuss wrote:
> Having supported and built cable modem systems for years (including
> them), Cox Business will do modems a few ways, but usually
> provisioning at the modem a limit quantity of mac/ip's (normally == 1)
> for what can pass, then you just *use* them as you would normally,
> either grabbing dhcp (with a new mac) or using statically assigning to
> the same public host as the main (ie firewall/router). If you get a
> contiguous /29 or larger network block/prefix from them or on your
> own, they'll usually give you a static ip and route that /29 prefix
> *at* your primary ip, so traffic knows how to get to you, then you
> just apply them with nat or however normally to the interface. They
> can also do private mpls connectivity, but that's another bag...
>
> As David said, your modem is NOT a router, mostly a Layer 1-2 bridge
> with some provisioned security features (DOCSIS BPI), unless it's one
> of their combo boxes with router/wifi built-in, but those tend to suck
> and you don't want to use those anyways. Any routing occurs at the
> Cox CMTS (cable modem termination system, your cable gateway router),
> or your gateway firewall/router.
>
> -mb
>
> On Sun, Jul 9, 2023 at 11:34 PM David Schwartz via PLUG-discuss
> <plug-discuss@lists.phxlinux.org> wrote:
>
>> Cable modems pull the signal from a coax line and turn it into an
>> ethernet signal that comes out of a single RJ-45 plug.
>>
>> I dunno squat about what goes on inside of those boxes, but routers
>> typically have a WAN port and a bunch of “internal” ports that
>> are all RJ-45 plugs.
>>
>> If you can get Cox to send traffic for a group of IPs to your modem,
>> then they should all come out the ethernet side as well, right?
>>
>> Remember that their modem is NOT a “router”. You can plug a
>> router into it, tho.
>>
>> -David Schwartz
>>
>>> On Jul 9, 2023, at 10:34 PM, Michael Butash via PLUG-discuss
>>> <plug-discuss@lists.phxlinux.org> wrote:
>>>
>>> On using openwrt on legacy routers, start here, find anything that
>>> is *well* supported and hunt on ebay, or go to a thrift shop and
>>> search this list if you find a decent looking box. At one point
>>> years ago I'd scooped up several decent goodwill routers for some
>>> $5-7ea and flashed to openwrt to give to family and friends when
>>> they complained about their crappy router and wifi not working.
>>> Probably still have one or two floating around...
>>>
>>> https://openwrt.org/toh/start
>>>
>>> -mb
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
> ---------------------------------------------------
> PLUG-discuss mailing list: PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> https://lists.phxlinux.org/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list:
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)