so what command do I execute to utilize the probe?
On Tue, Oct 31, 2017 at 8:58 PM, Michael <
bmike1@gmail.com> wrote:
> it is there:
> $ modinfo k10temp
> filename: /lib/modules/4.4.0-53-generic/kernel/drivers/hwmon/
> k10temp.ko
> license: GPL
> author: Clemens Ladisch <clemens@ladisch.de>
> description: AMD Family 10h+ CPU core temperature monitor
> srcversion: 4BBE5D56D6917F9D3D415AA
> alias: pci:v00001022d00001583sv*sd*bc*sc*i*
> alias: pci:v00001022d00001533sv*sd*bc*sc*i*
> alias: pci:v00001022d00001573sv*sd*bc*sc*i*
> alias: pci:v00001022d0000141Dsv*sd*bc*sc*i*
> alias: pci:v00001022d00001403sv*sd*bc*sc*i*
> alias: pci:v00001022d00001603sv*sd*bc*sc*i*
> alias: pci:v00001022d00001703sv*sd*bc*sc*i*
> alias: pci:v00001022d00001303sv*sd*bc*sc*i*
> alias: pci:v00001022d00001203sv*sd*bc*sc*i*
> depends:
> intree: Y
> vermagic: 4.4.0-53-generic SMP mod_unload modversions
> parm: force:force loading on processors with erratum 319 (bool)
>
>
> On Tue, Oct 31, 2017 at 4:44 PM, Jerry Snitselaar <dev@snitselaar.org>
> wrote:
>
>> On Tue Oct 31 17, Michael wrote:
>>
>>> Sorry to say but yes it is.
>>>
>>> $ lscpu
>>> Architecture: x86_64
>>> CPU op-mode(s): 32-bit, 64-bit
>>> Byte Order: Little Endian
>>> CPU(s): 4
>>> On-line CPU(s) list: 0-3
>>> Thread(s) per core: 1
>>> Core(s) per socket: 4
>>> Socket(s): 1
>>> NUMA node(s): 1
>>> Vendor ID: AuthenticAMD
>>> CPU family: 16
>>> Model: 5
>>> Model name: AMD Athlon(tm) II X4 620 Processor
>>> Stepping: 2
>>> CPU MHz: 1400.000
>>> CPU max MHz: 2600.0000
>>> CPU min MHz: 800.0000
>>> BogoMIPS: 5223.39
>>> Virtualization: AMD-V
>>> L1d cache: 64K
>>> L1i cache: 64K
>>> L2 cache: 512K
>>> NUMA node0 CPU(s): 0-3
>>> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
>>> pge
>>> mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext
>>> fxsr_opt
>>> pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc
>>> extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic
>>> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
>>> hw_pstate vmmcall npt lbrv svm_lock nrip_save
>>>
>>> After looking further into this I found something <below>. Do you think I
>>> should compile it?
>>> Date Fri, 20 Nov 2009 09:15:23 +0100
>>> From Clemens Ladisch <>
>>> Subject [PATCH] k10temp: temperature sensor for AMD Family 10h/11h CPUs
>>>
>>>
>> The k10temp driver has been in the kernel since 2.6.33. look at the
>> config for
>> your kernel to see if CONFIG_SENSORS_K10TEMP is there. I imagine your
>> kernel
>> already has the moduile built, unless you have been building your own.
>>
>> try 'modinfo k10temp' and see if it is there already.
>>
>>
>> ---------------------------------------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>>
>
>
>
> --
> :-)~MIKE~(-:
>
--
:-)~MIKE~(-:
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss