So I'm thinking there has to be some sort of concurrent startup runlevel
issue. Not really sure how to adjust this, but do you see any place in
that init script that could cause this or something left out of the
dependencies or something? Here's the first bit of the init.d again:
### BEGIN INIT INFO
# Provides: ntp
# Required-Start: $network $remote_fs $syslog
# Required-Stop: $network $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop:
# Short-Description: Start NTP daemon
### END INIT INFO
On Tue, Sep 8, 2015 at 7:23 PM, Tejeev Patel <
tejeevpatel@gmail.com> wrote:
> Hi all,
> Thanks for your replies James and Hans. I've included some responses in
> the bellow email:
>
>
>> moin moin TJ,
>>
>> what James said in regards to debugging ntp :).
>>
> Ill check on these step tickers, but my understanding was that the -g
> option should take care of that. Can I put in sdout's in the init script
> to log when stuff is being done so i can maybe trace where it quits? Any
> recommendations on where to put them in or how to do some debugging here?
>
>
>> Here are some other things to check.
>>
>> Is there some ntp process already running?
>>
>> ps auxw | grep ntp
>>
>> No NTP process already running.
>
>
>> Is there a config file in /etc/default/ that has an entry to not start
>> ntp?
>>
>> Only see an ntpdate config that basically says to look at the server list
> in ntp.conf rather than it's own and a ntp config that includes the option
> -g that I was originally looking to include here.
>
> Is ntpdate installed and configured to prevent ntpd from starting?
>>
>> ntpdate is apparently installed
>
> As James mentioned, ntp will refuse to change the time if it's off too
>> much. Check to see if the systems are within a couple of minutes of the
>> actual time.
>>
>> ntp will quit if the time is off by 1000 s or more but the -g option
> should override that.
> ( -g Normally, ntpd exits with a message to the system log if the offset
> exceeds the panic threshold, which is 1000 s by default. This option allows
> the time to be set to any value without restriction; however, this can
> happen only once. If the threshold is exceeded after that, ntpd will exit
> with a message to the system log. This option can be used with the -q and
> -x options.)
>
> Verify your hardware clock is set to UTC.
>>
>> Make sure your OS is set at the proper offset from UTC, e.g. you're set to
>> now and AZ time zone, rather than now and eastern time zone.
>>
>> If the boxen are servers they should be set to UTC. Star date blah, blah,
>> blah and all that.
>>
> Both hardware and software are set to UTC on our servers.
>
>
>> cioa,
>>
>> der.hans
>>
>
>
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)