ntp

I've got all of my servers running ntp to sync time, and though most are
running fine without a hitch, I seem to have an issue where for some reason
the service just doesn't start on some of them. Same install procedure on
all servers. No errors in syslog or ntp for days, even when server has
been rebooted in that time.
The service just isn't running and I don't know why. I've included the
ntp.conf and the init script below.

Any help would be appreciated.

Thanks,
TJ

##############################################################################################
*ntp.conf*
##############################################################################################

# This file has been modified by adding our two ntp servers. commenting out
all the pool servers
# and redirecting ntp logs to an ntp logfile. File is distributed via
# cp.get_file salt command and then the ntp service is restarted via a
cmd.run
# -TJ 2015/08/14


# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
driftfile /var/lib/ntp/ntp.drift
logfile /var/log/ntpd.log

# Enable this if you want statistics to be logged.
#statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable

# You do need to talk to an NTP server or two (or three).
#server 67.40.67.44 iburst

# pool.ntp.org maps to about 1000 low-stratum NTP servers. Your server will
# pick a different set every time it starts up. Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
#server 0.debian.pool.ntp.org iburst dynamic
#server 1.debian.pool.ntp.org iburst dynamic
#server 2.debian.pool.ntp.org iburst dynamic
#server 3.debian.pool.ntp.org iburst dynamic

server *[Our central ntp server ip] *dynamic prefer
server *[Our backup ntp server ip] *dynamic


# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html
for
# details. The web page <
http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a
configuration
# that might be intended to block requests from certain clients could also
end
# up blocking replies from your own upstream servers.
# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment
the
# next lines. Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient







##############################################################################################
*init.d/ntp*
##############################################################################################

  GNU nano 2.2.6                                                   File:
/etc/init.d/ntp

#!/bin/sh

### BEGIN INIT INFO
# Provides:        ntp
# Required-Start:  $network $remote_fs $syslog
# Required-Stop:   $network $remote_fs $syslog
# Default-Start:   2 3 4 5
# Default-Stop:
# Short-Description: Start NTP daemon
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin

. /lib/lsb/init-functions

DAEMON=/usr/sbin/ntpd
PIDFILE=/var/run/ntpd.pid

test -x $DAEMON || exit 5

if [ -r /etc/default/ntp ]; then
        . /etc/default/ntp
fi

if [ -e /var/lib/ntp/ntp.conf.dhcp ]; then
        NTPD_OPTS="$NTPD_OPTS -c /var/lib/ntp/ntp.conf.dhcp"
fi

LOCKFILE=/var/lock/ntpdate

lock_ntpdate() {
        if [ -x /usr/bin/lockfile-create ]; then
                lockfile-create $LOCKFILE
                lockfile-touch $LOCKFILE &
                LOCKTOUCHPID="$!"
        fi
}

unlock_ntpdate() {
        if [ -x /usr/bin/lockfile-create ] ; then
                kill $LOCKTOUCHPID
                lockfile-remove $LOCKFILE
        fi
}

RUNASUSER=ntp
UGID=$(getent passwd $RUNASUSER | cut -f 3,4 -d:) || true
if test "$(uname -s)" = "Linux"; then
        NTPD_OPTS="$NTPD_OPTS -u $UGID"
fi

case $1 in
        start)
                log_daemon_msg "Starting NTP server" "ntpd"
                if [ -z "$UGID" ]; then
                        log_failure_msg "user \"$RUNASUSER\" does not exist"
                        exit 1
                fi
                lock_ntpdate
                start-stop-daemon --start --quiet --oknodo --pidfile
$PIDFILE --startas $DAEMON -- -p $PIDFILE $NTPD_OPTS
                status=$?
                unlock_ntpdate
                log_end_msg $status
                ;;
        stop)
                log_daemon_msg "Stopping NTP server" "ntpd"
                start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE
                log_end_msg $?
                rm -f $PIDFILE
                ;;
        restart|force-reload)
                $0 stop && sleep 2 && $0 start
                ;;
        try-restart)
                if $0 status >/dev/null; then
                        $0 restart
                else
                        exit 0
                fi
                ;;
        reload)
                exit 3
                ;;
        status)
                status_of_proc $DAEMON "NTP server"
                ;;
        *)
                echo "Usage: $0
{start|stop|restart|try-restart|force-reload|status}"
                exit 2
                ;;
esac

---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss