Re: Need Help with Debian Networking

Top Page
Attachments:
Message as email
+ (text/plain)
Delete this message
Reply to this message
Author: Ed
Date:  
To: Main PLUG discussion list
Subject: Re: Need Help with Debian Networking
I think the problem may be at the router - can you show the ifconfig
(if?) when you are connected via wifi - I would look at the network
segment, is it the same as the wired connection? my guess is not.

192.168 networks are not routed and I think you have two - wired and
wifi. While a bridge on the AP would be quick & easy (and a bad idea)
- a VPN would be more secure and more useful overall. you could even
use it when on the road to access your wired network.

I'm not a Debian user so ymmv - There are many on the list so getting
cli from them would be better - Ed

On Thu, Jun 19, 2014 at 11:46 AM, Mark Phillips
<> wrote:
> I am running Debian testing. When I reboot and plug in my network cable, I
> am able to ping external servers and machines on my LAN. Basically, it all
> just works with the network cable plugged in.
>
> When I reboot and turn on the wifi (ie there is a switch on my laptop to
> turn on/of wifi) and have the network cable disconnected, I can ping
> external sites but not internal machines. I get the message Destination Host
> Unreachable. If I then plug in the network cable (and turn off wfi) I am
> able to ping both internal and external servers. If I now disconnect the
> cable and turn on wifi again, I can ping both external and internal servers.
>
> /etc/network/interfaces
> auto eth0
> iface eth0 inet static
>         address 192.168.25.150
>         netmask 255.255.255.0
> gateway 192.168.25.1
> dns-search ph.cox.net
> dns-nameservers 68.105.28.12 68.105.29.12 68.105.28.11
>         gateway 192.168.25.1

>
> allow-hotplug wlan0
> iface wlan0 inet dhcp
>
> I looked at resolv.conf and route for the two scenarios -
>
> 1. Reboot into cable connected network -
> root@orca:/home/mark# route
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> default         gateway         0.0.0.0         UG    0      0        0 eth0
> link-local      *               255.255.0.0     U     1000   0        0 eth0
> 192.168.25.0    *               255.255.255.0   U     0      0        0 eth0

>
> root@orca:/home/mark# cat /etc/resolv.conf
> # Generated by NetworkManager
> search ph.cox.net
> nameserver 68.105.28.12
> nameserver 68.105.29.12
> nameserver 68.105.28.11
>
> 2. Reboot into wifi
> root@orca:/home/mark# route
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref    Use
> Iface
> default         gateway         0.0.0.0         UG    0      0        0
> wlan0
> link-local      *               255.255.0.0     U     1000   0        0
> wlan0
> 192.168.25.0    *               255.255.255.0   U     0      0        0 eth0
> 192.168.25.0    *               255.255.255.0   U     0      0        0
> wlan0

>
> root@orca:/home/mark# cat /etc/resolv.conf
> nameserver 192.168.25.1
>
> I could change interfaces to have a static IP for wifi, and it would work
> when I reboot. However, for that occasional visit to Starbucks my wifi would
> not work.
>
> What do I need to do to make my wifi work both at home and on the road?
>
> Thanks,
>
> Mark
>
> ---------------------------------------------------
> PLUG-discuss mailing list -
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss

---------------------------------------------------
PLUG-discuss mailing list -
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss