First Gen Hyperthreading was interesting but the processors and
corresponding front side bus's did not have enough bandwidth to utilize the
technology correctly. the current rendition has far more bandwidth
available and it is far more useful.
In working with linux it is much better at using hyperthreading then
windows is, due to its natural handling of parallel multitasking. I would
suggest you enable it for more modern hardware (Core i series ect), but on
really old school systems i would enable it if you have lots of little
processes or a large process with a number of little processes on the side.
On Mon, May 5, 2014 at 9:25 AM, Carruth, Rusty <
Rusty.Carruth@smarth.com>wrote:
> In my past experience, I had noticed that the BOGOMIPS reported on (each
> of the) hyperthreading enabled CPUs was half that of the same CPU with
> hyperthreading turned off. Which made me believe that the 2 CPUs were
> effectively half the speed of the single one. (That is, if single is 2
> bogomips, then hyperthreaded it was 1 bogomips on each CPU).
>
>
>
> Since I knew that Linux did a good job of true multitasking, I always
> turned it off (assuming that part of the impetus for the whole thing was
> that Windows did a TERRIBLE job of true multitasking (remember trying to do
> ANYTHING else while doing a floppy format? Yeah, I thought you did J) so
> that windows could tie up one of the 'CPUs' doing a floppy format (or
> whatever) and still look responsive to the GUI using the other 'CPU'.
>
>
>
> So, I have to ask a few questions:
>
>
>
> 1 - does that slow 1.2GHz (SLOW? 1.2G? Wow, how times have changed!) play
> back fine with hyperthreading turned off?
>
> 2 - if XBMC gives a 20% performance boost on a CPU that is running at half
> the speed, is that really a performance boost overall? (I'm probably
> missing something...)
>
>
>
> Just wondering J
>
>
>
> Rusty
>
>
>
> *From:* plug-discuss-bounces@lists.phxlinux.org [mailto:
> plug-discuss-bounces@lists.phxlinux.org] *On Behalf Of *Bryan O'Neal
> *Sent:* Sunday, May 04, 2014 9:48 PM
> *To:* Main PLUG discussion list
> *Subject:* Re: hyperthreading....
>
>
>
> Short answer is that it is a way each physical core gets presented to the
> OS as two logically cores. Through some well documented voodoo it increases
> paralization for some work loads. Available on many Pentium systems since
> the Pentium 4 but also requires comparable chipsets so some early systems
> had processors that supported it but still could not use it. Mostly I see
> it on Xoen systems
> Some bios allow you to disable it.
>
> On May 4, 2014 9:35 PM, "Michael Havens" <bmike1@gmail.com> wrote:
>
> what is it and is it an option in a modern BIOS?
>
> I ask because I got an interesting message on another list othat I
> participate in.
>
> [quote]Even though an AGP card may not support vdpau acceleration, a p4
> should be able to use the Nvidia driver to get some openGL 2D accelerated
> output for XBMC. You should also have hyperthreading turned on in the BIOS,
> so the system will see two CPU cores, as XMBC will take advantage of that
> for maybe a 20% performance boost. My netbook, with a slow 1.2 GHz
> hyperthreaded Intel Atom CPU and 945M graphics, is still able to play back
> 720p h.264 encoded movies smoothly on MX 14.
>
>
> Steve (finishing up the packaging of XBMC 13.0, which coincidently was
> just released)[/quote]
>
> :-)~MIKE~(-:
>
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
--
A mouse trap, placed on top of your alarm clock, will prevent you from
rolling over and going back to sleep after you hit the snooze button.
Stephen
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)