Am 05. Nov, 2013 schwätzte Stephen so:
moin moin,
turns out xorg.conf can still be used. Created a file with a screens
section and a virtual entry and both displays work.
> That should be able to run dual digital displays. But it may require the
> mad driver to do it. It should be a shared ramdac and gpu. So unless the
> did something weird on port it should work with the right driver in play.
mad driver? Is that the UPS guy from the show? :)
It would be awesome if I could get both working via digital. I didn't
retry that after getting virtual setup.
Previous tries didn't work because bios and boot up wouldn't display if
both were plugged in, so I was already having problems before X. I need to
be able to see boot up because I currently intentionally require an
interactive boot process. While the interacive could involve unplugging
and replugging a cable, I'd rather not.
I'll try a few things, though.
ciao,
der.hans
> On Monday, November 4, 2013, der.hans wrote:
>
>> Am 04. Nov, 2013 schwätzte Mike Bushroe so:
>>
>> moin moin,
>>
>> because there is so much difference in how they implement VGA (limited
>>> resolution, analog out, sync pulses, etc) and digital they many "dual
>>> head"
>>> display drivers have one of each to make sure that what ever type of
>>> display you have, they can drive at least one. So I fear that you quest
>>> for
>>> 2 digital displays is likely to fail, or require new hardware, not just
>>> new
>>> software.
>>>
>>
>> Ah, so one chip for digital that can feed one display and another chip for
>> analog. Kinda what I was figuring.
>>
>> What are you using for video? X? You might need Xinerama to get full use
>>> of
>>> both screens.
>>>
>>
>> I would prefer to use xrandr. Besides, Xinerama is so 2000's :).
>>
>> In either case, I still think it needs to be able to drive that much
>> display. Not sure why the proprietary driver can and the Free Software
>> driver can't.
>>
>> 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI
>> RS780L [Radeon HD 3000] (prog-if 00 [VGA controller])
>> Subsystem: Micro-Star International Co., Ltd. Device 7501
>> Flags: bus master, fast devsel, latency 0, IRQ 18
>> Memory at d0000000 (32-bit, prefetchable) [size=256M]
>> I/O ports at c000 [size=256]
>> Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
>> Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
>> Expansion ROM at <unassigned> [disabled]
>> Capabilities: <access denied>
>>
>> ciao,
>>
>> der.hans
>>
>> Mike
>>>
>>>
>>> moin moin,
>>>>
>>>> It looks like I can get 2 out of 3 as long as the two aren't HDMI and DVI
>>>> :(. With cables plugged into both ports I can't even see post. Remove one
>>>> and suddenly lights are on.
>>>>
>>>> Using either HDMI or DVI with VGA works, though.
>>>>
>>>> Now I just need to figure out why wheezy demands on cloning the output.
>>>>
>>>> I'm hoping to find a solution that doesn't require installing the
>>>> proprietary driver :).
>>>>
>>>> ciao,
>>>>
>>>> der.hans
>>>>
>>>> --
>>>>
>>> "Creativity is intelligence having fun." — Albert Einstein
>>>
>>>
>> --
>> # http://www.LuftHans.com/ http://www.LuftHans.com/Classes/
>> # "It is a miracle that curiosity survives formal education."
>> # -- Albert Einstein
>
>
>
>
--
# http://www.LuftHans.com/ http://www.LuftHans.com/Classes/
# Data restorals via Freedom of Information Act requests.
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)