Re: mkfs

THen you are good... :)
Create a partition and install a FAT-32 filesystem if you plan on pluging
that thing to Wincrap.
ET


Michael Havens writes:

> dmesg says the drive is sdc. I can then mount the drive and look at it's
> contents.
> now for your directions:
> bmike1@PresarioLapTop1:~$ lsusb > /tmp/junk-lsusb-0.txt
> bmike1@PresarioLapTop1:~$ cat /proc/partitions > /tmp/junk-partitions-0.txt
> bmike1@PresarioLapTop1:~$ lsusb > /tmp/junk-lsusb-1.txt
> bmike1@PresarioLapTop1:~$ cat /proc/partitions > /tmp/junk-partitions-1.txt
> bmike1@PresarioLapTop1:~$ diff /tmp/junk-lsusb-?.txt
> 0a1
>> Bus 001 Device 005: ID 0930:6544 Toshiba Corp. Kingston DataTraveler 2.0
> Stick (2GB)
>
> All is good.
>
> I can tell you right now that there are no partitions on this drive. It is
> dev/sdc. I kinow this is the case because I can mount /dev/sdc /mnt/sdc and
> look at the contents. There is nothing in it that I want to keep.
> :-)~MIKE~(-:
>
>
>
>
> On Sun, Aug 4, 2013 at 8:12 AM, <kitepilot@kitepilot.com> wrote:
>
>> First question to answer is: Is the drive being detected?
>> Unplug the drive, wait a minute and do:
>> lsusb > /tmp/junk-lsusb-0.txt
>> cat /proc/partitions > /tmp/junk-partitions-0.txt
>> Now plug the drive, wait a minute and do:
>> lsusb > /tmp/junk-lsusb-1.txt
>> cat /proc/partitions > /tmp/junk-partitions-1.txt
>> Then
>> diff /tmp/junk-lsusb-?.txt
>> If you see at leas one line you are good, otherwise you are dead in the
>> water.
>> If you can see the device, then:
>> diff /tmp/junk-partitions-?.txt
>> That's your partition.
>> Depending on what you have (if you have) next steps are different.
>> YMMV...
>> ET
>>
>>
>> Michael Havens writes:
>>
>>> Okay, when I was making a backup drive I did so on a drive that was too
>>> small. (bummer) now, when I stick that device in nothing happens (the nice
>>> little file manager doesn't appear). So I think that is because I created
>>> a
>>> label for this drive. So I wonder to myself how to fix it. What I think of
>>> is mkfs. What is a generic filesystem I can use on microsoft computers
>>> too?
>>> is xtfs the best or should I go with fat 16/32? or am I incorrect that
>>> this
>>> will fix the problem?
>>> :-)~MIKE~(-:
>>>
>> ------------------------------**---------------------
>> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.**org<PLUG-discuss@lists.phxlinux.org>
>> To subscribe, unsubscribe, or to change your mail settings:
>> http://lists.phxlinux.org/**mailman/listinfo/plug-discuss<http://lists.phxlinux.org/mailman/listinfo/plug-discuss>
>>
---------------------------------------------------
PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss