Don't give up your Starbucks! Until you get it fixed (and as a good backup
access mechanism) check out
http://www.teamviewer.com. Every OS is
supported and you can access your desktop from a web browser remotely.
-Mike
On Sunday, May 26, 2013, Mark Phillips wrote:
> Thanks to everyone for their suggestions!
>
> The good news.....the server is healthy, and I solved the problem of the
> "ssh session ignoring me every few minutes". It seems I made a mistake in
> the configuration of openVPN in my new ASUS DD-WRT router.
>
> The better news....turning off openVPN on my router also solved my
> intermittent LAN printing and scanning issues.
>
> The bad news.....need to fix the VPN connection to my LAN. I guess I will
> be drinking my Starbs at home for awhile! ;)
>
> Happy Memorial Day Weekend to all PLUGers!!
>
> Mark
>
>
> On Sun, May 26, 2013 at 1:44 AM, Lisa Kachold <lisakachold@obnosis.com>wrote:
>
> Hello Mark,
>
>
>
>
> On Sat, May 25, 2013 at 11:59 AM, Mark Phillips <
> mark@phillipsmarketing.biz> wrote:
>
> I have an old headless server running Linux version 2.6.32-5-686 (Debian
> 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4)
> ). Recently, when I log in using ssh the terminal window freezes for a few
> seconds, then usually comes back. The command line stops printing the
> characters I am typing, the cursor stops blinking, and then after a few
> seconds, it comes back. This happens every few minutes, so it is becoming
> rather annoying.
>
>
> Here's the general list (some of which you have done already).
>
> 0 - Make sure that it's not swapping with "free".
> 1 - Check that you have no ethernet errors with "ethtool eth0" (or
> whatever your interfaces are) and look for errors.
> 1.5 - Check ' netstat -s -p|grep "segments retransmited" ' for packet
> loss
> 2 - Check "netstat -antp" to see what is listening and/or bogging down.
> 3 - Check "lsof" to see what the system is doing.
> 4 - Are you accessing SSH via SSH forwarding, a different place/network or
> VPN? This could be a MTU issue.
> 5 - Run "nmap $servername" from your system to check what is available and
> listening.
> 6 - Look in your logs for security issues; specifically access attempts to
> open ports; firewall to only allow source and destination for SSH, DNS or
> other Mail as appropriate.
> 7 - Disable your SSH timeout - just to be safe:
> http://docs.oseems.com/general/application/ssh/disable-timeout
> 8 - Use a ping from your system to the server to see if you can see
> latency.
> 9 - Use a traceroute/tracert to see latency between any hop.
>
>
> Use the Source my friend!
>
>
> When I check the disks, I get
> # df -h
> Filesystem Size Used Avail Use% Mounted on
> /dev/sda1 182G 42G 131G 25% /
> tmpfs 505M 0 505M 0% /lib/init/rw
> udev 500M 140K 500M 1% /dev
> tmpfs 505M 0 505M 0% /dev/shm
> /dev/sdb1 230G 146G 72G 67% /mnt/sdb
>
> So I am not running out of disk space.
>
> When I run top, I get this output:
> Tasks: 90 total, 3 running, 87 sleeping, 0 stopped, 0 zombie
> Cpu(s): 7.0%us, 3.0%sy, 0.0%ni, 82.7%id, 6.6%wa, 0.3%hi, 0.3%si,
> 0.0%st
> Mem: 1032748k total, 1013748k used, 19000k free, 242992k buffers
> Swap: 2017272k total, 1040k used, 2016232k free, 473584k cached
>
> So I am not running a process that is taking over the CPU.
>
> How should I go about diagnosing this problem?
>
> Thanks!
>
> Mark
>
> ---------------------------------------------------
> PLUG-discuss mailing list - PLUG-discuss@lists.phxlinux.org
> To subscribe, unsubscribe, or to change your mail settings:
> http://lists.phxlinux.org/mailman/listinfo/plug-discuss
>
>
>
>
> --
>
> (503) 754-4452 Android
>
>
---------------------------------------------------
PLUG-discuss mailing list -
PLUG-discuss@lists.phxlinux.org
To subscribe, unsubscribe, or to change your mail settings:
http://lists.phxlinux.org/mailman/listinfo/plug-discuss
(text/plain)